• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 268
  • Last Modified:

Help with adding a port for the ASA Cisco Router

Please help me with my ASA 5505 Cisco Router to be able to Add a port for using Remote Desk Top application on my Tablet.  My boss is pissed that I can't do it.
There is 1 port already being used I just need to add another one so my boss can remote into his work computer.
Here is the background the Router is already setup- it already allows 1 user from the outside on a port.  There is already VPN tunneling setup for Anyconnet.  
The problem.  Tablets can-not use the Anyconnet VPN tunnel.  Therefore I want to use a RDP from the tablet to my bosses computer.  The problem is getting the right information in the RDP- the port is already being used so I need to make another one available.  
Can anyone give me a step by step.  
Do I just add another device? Add a port?  I have the Cisco ASDM module open and ready. Thank you.
0
PRNAdmin
Asked:
PRNAdmin
  • 3
1 Solution
 
jjmartineziiiCommented:
access-list outside_acl extended permit tcp any host 4.2.2.2 eq 3389
static (inside,outside) 4.2.2.2 10.15.165.10 netmask 255.255.255.255
access-group outside_acl in interface outside



Here is an example for setting up what you want. The example assumes:

Your public IP address is 4.2.2.2
The IP of the internal computer you are trying to access is 10.15.165.10
Your outside interface is named 'outside'
Your inbound outside interface is named 'outside_acl'


If you post your full config with passwords and public IP masked, I can help more specifically.
0
 
PRNAdminAuthor Commented:
Thanks
0
 
PRNAdminAuthor Commented:
Thank you
0
 
PRNAdminAuthor Commented:
thank you
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now