[Last Call] Learn how to a build a cloud-first strategyRegister Now


T1 to DSL Point to Point connection performance

Posted on 2011-10-14
Medium Priority
Last Modified: 2012-05-12

I have three offices that will have a Managed Internet Service (T1) and will be establishing a VPN over to my main office where our servers are at. Now, the main office has DSL and I do not think this going to give me the most speeds because I have DSL at my main site. I want to confirm this is true and what speeds would be recommended for three T1s coming into main site?


Question by:Jaime Campos
1 Comment
LVL 18

Accepted Solution

jmeggers earned 2000 total points
ID: 36971132
Three T1s would be about 4.5mbps aggregated.  If all three sites are connecting and passing full traffic to the DSL site, to allow for IPSec encryption overhead, I'd probably look for the DSL site to be able to handle 5mbps, if that's what you're asking.

Featured Post

Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

834 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question