<div>
<div class="content wysiwyg-content">
I have a Supermicro x7dvl-e motherboard with built in RAID 10. &nbsp;I have four drives in array. &nbsp;I believe the motherboard may have failed and I would like to know how I can recover data as it is striped? &nbsp;
</div>
</div>


I have a Supermicro x7dvl-e motherboard with built in RAID 10.  I have four drives in array.  I believe the motherboard may have failed and I would like to know how I can recover data as it is striped?  

Motherboard Failed - How do I receover DATA from RAID 10

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.

Server Hardware

Disaster Recovery is the planning for and creation of policies and procedures related to the resumption or continuation of an organization's functions following a catastrophic event. The term is most frequently used in relation to failure of networks, but DR preparations also include other business systems and personnel considerations.

Disaster Recovery

RAID stands for Redundant Array of Independent Disks.

RAID is data storage technology that allows multiple drives to be used together as a single virtual drive for reasons such as fault tolerance, reliability and performance. 

There are several different levels of RAID that determine how the data is stored and the level of redundancy achieved across the drives.