NO NAT

Hi

I have site-site vpn between cisco products.
LOCAL = 10.20.30.0/24
REMOTE = 20.30.40.0/24

I like to put NO NAT Acces-list for traffic coming from 20.30.40.0/24 on LOCAL router.How do write this ACL on LOCAL router cisco 1800 ?

Thanks
1w3Asked:
Who is Participating?
 
Jimmy Larsson, CISSP, CEHConnect With a Mentor Network and Security consultantCommented:
You make the access-list by specifying traffic FROM your LOCAL router TO the REMOTE router.

Like
permit ip 10.20.30.0 0.0.0.255 20.30.40.0 0.0.0.255

Best regards
Kvistofta
0
 
1w3Author Commented:
Is this called NO NAT in routers ?
so when traffic from 20.30.40.0/24 reaches network 10.20.30.0/24 it appears as 20.30.40.0 subnet ?
0
 
royitCommented:
Check this link. It is exactly what you need.
0
 
1w3Author Commented:
I Cannot see the link
0
 
1w3Author Commented:
I requested for link but it was never provided
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.