amdj
asked on
Cisco PIX 515E
One of site Cisco pix 515E is configured connecting site to site via vpn tunnel to our head quarter ASA 5510, on the site that use pix 515E we will have a new internet provider which mean we will have a new public static ip. Do I just change the outside interface with the new IP or do I need to reconfigure everything. Thanks
Outside interface, destination address on the VPN tunnels, and NAT pools.
Oh and static statements
ASKER
The ISP remain the same for the head quarter, only the branch office that has the pix 515E will be switching the ISP.
Outside interface, destination address on the HQ office VPN destination tunnels, nat pools, and any static statement. Same answer.
ASKER
To recap:
HQ ASA5510:
Change the destination address (new ISP address from branch office)
Branch office PIX515E:
Outside Interface (new isp address)
Destination address (HQ address)
NAT Pool
Static statemnets
HQ ASA5510:
Change the destination address (new ISP address from branch office)
Branch office PIX515E:
Outside Interface (new isp address)
Destination address (HQ address)
NAT Pool
Static statemnets
Exactly.
If you have 7.x or higher this video should give you some pointers:
http://www.youtube.com/watch?v=xzzoK7u9jXM
http://www.youtube.com/watch?v=xzzoK7u9jXM
ASKER
Thanks guys, here's one more question.
How does ASA 5510 connect multiple site to site vpn? are all sites be going through a interface?
How does ASA 5510 connect multiple site to site vpn? are all sites be going through a interface?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thanks for the information!