Linksys RVL200 Firmware Version: v1.1.12 .1 SSL VPN & Active Directory
Posted on 2011-10-18
I would like to have my users remotely log in into our network with their active directory account.
I have a changed the time and date on the router to match the active directory server but still do not know the proper steps to have my end users log in remotely and have their mapped drives and other small progams work with our network.
I need to know what i put on the linksys switch for the user account what username and passwords they would need put into the linksys login screen to allow for the SSL VPN to work propoerly.
These are the only instructions that i was able to find for the RVL200
Active Directory Authentication
Server Address: Enter the IP address or Domain Name of the Active Directory server in the Server Address field.
Active Director Domain: Enter the Active Directory domain name in the Active Directory Domain field.
Active Directory Troubleshooting
If your users are unable to connect via Active Directory, verify the following:
1.The time settings between the Active Directory server and the RVL200 must be synchronized. Kerberos authentication, used by Active Directory to authentication clients, permits a maximum of a 15-minute time difference the Windows server and the client (RVL200).
2.Confirm that your Windows server is configured for Active Directory authentication. If you are using Window NT4.0 server, then your server only supports NT Domain authentication. Typically, Windows 2000 and 2003 servers are also configured for NT Domain authentication to support legacy Windows clients.