?
Solved

SonicWALL TZ 170 + Cisco Aironet 1141N WAP

Posted on 2011-10-18
1
Medium Priority
?
514 Views
Last Modified: 2013-03-26
I have a SonicWALL TZ 170 firewall with the latest firmware installed (SonicOS standard). I also have a new Cisco Aironet 1141N autonomous wireless access point. Basically what I'm trying to do is connect the 1141 through the TZ 170 to provide wireless capability for several devices.

In the experience of our EE members, is it worth the time to try and get these two devices to work together? I know that the TZ 170 does not support VLANS, nor do I have a managed swicth for this, but I also know that the 1141 does not have to have specific VLANs associated with it during basic setup (optional setting). Would this configuration then be as simple as pluggin the 1141 into the TZ 170's switch and passing DHCP from the TZ to the 1141?

Thanks for any insight or known caveats with this setup.
0
Comment
Question by:SIkich
1 Comment
 
LVL 8

Accepted Solution

by:
Salah Eddine ELMRABET earned 200 total points
ID: 36988217
Hi,

You need just to plug the AP into network, if you have DHCP running in sonicwall this will be used for wireless client also.

BR
0

Featured Post

A Cyber Security RX to Protect Your Organization

Join us on December 13th for a webinar to learn how medical providers can defend against malware with a cyber security "Rx" that supports a healthy technology adoption plan for every healthcare organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hopefully this article will help someone who's had the same issues I had. I have a Dell Wireless 1390 WLAN Mini-Card and Windows 7, and for the past couple of days I was beyond frustrated because my wireless laptop was not able to access the Inte…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

862 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question