CEHJ
asked on
Small form factor usb wireless adapter
Could someone who is using one of these under Linux to their satisfaction kindly tell me the following
1. The make and model number of the adapter
2. uname -r
3. The driver module being used
4. The firmware (if any) being used
Don't be put off if you don't know all the above, but the more info, the better.
1. The make and model number of the adapter
2. uname -r
3. The driver module being used
4. The firmware (if any) being used
Don't be put off if you don't know all the above, but the more info, the better.
ASKER
>>Wireless as in Bluetooth?
No, sorry. As in wifi
No, sorry. As in wifi
you may need to request attention to get more answers.
ASKER
I'm thinking about it. I might just scrub the form factor element
ASKER
noci, i'm going to reopen this question, omitting the small form factor element.
Personally i never like to leave anyone unrewarded for making helpful comments in my questions, so please repost something in the new one if you can
Personally i never like to leave anyone unrewarded for making helpful comments in my questions, so please repost something in the new one if you can
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Please close this for the reasons stated - have reopened the same q. minus the form factor element
lsusb: Bus 007 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
uname -r: 2.6.39-gentoo-r3
Driver module: btusb
Small inbuilt board:
Bus 004 Device 002: ID 413c:02b0 Dell Computer Corp.
uname -r: 2.6.39-gentoo-r3
Driver module: btusb
For wifi you probably need something bigger because the antenna needs to be larger.