tganus
asked on
How to setup On Connect Script for SSL VPN users in ASA 5510
Hello. I found a link to some documentation on the internet for doing this here:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect25/administration/guide/ac03features.html#wp1068902
I can import the .bat file I want to run using those instructions, but the section for "AnyConnect Client Profile" isn't in our ASA 5510. Can someone point me in the right direction of what I need to do next.
The goal is to have the ASA 5510 automatically run a batch file for the users when they connect for the purpose of mapping network drives. Any help is much appreciated. :)
PS - Pretend I know nothing about programming Cisco devices. I have access to ASDM 6.2 for programming the device. ;)
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect25/administration/guide/ac03features.html#wp1068902
I can import the .bat file I want to run using those instructions, but the section for "AnyConnect Client Profile" isn't in our ASA 5510. Can someone point me in the right direction of what I need to do next.
The goal is to have the ASA 5510 automatically run a batch file for the users when they connect for the purpose of mapping network drives. Any help is much appreciated. :)
PS - Pretend I know nothing about programming Cisco devices. I have access to ASDM 6.2 for programming the device. ;)
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.