[Webinar] Streamline your web hosting managementRegister Today

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 699
  • Last Modified:

Cisco and VPN

We have a few remote users and their private IP address is 10.1.10.X, when they connect to our VPN they are given an IP of 10.10.2.X. Then when they try to connect to our servers they cannot - I'm assuming because our servers are also on a 10.1.10X subnet.
How can I fix it to where they can access the servers subnet?
0
tolinrome
Asked:
tolinrome
  • 4
  • 2
1 Solution
 
shadowmantxCommented:
Check gateway settings from VPN DHCP IP pool.

If it is setup correctly, just add a static route from 10.10.2.x to 10.1.10.x
0
 
tolinromeAuthor Commented:
I'm using the ASDM and when I try to edit the VPN Pool I receive "IP Address pool VPN cannot be edited because it is being used by connection profile company name.
0
 
tolinromeAuthor Commented:
where and how can I check the gateway settings for VPN DHCP IP Pool? Thanks
0
Get Certified for a Job in Cybersecurity

Want an exciting career in an emerging field? Earn your MS in Cybersecurity and get certified in ethical hacking or computer forensic investigation. WGU’s MSCSIA degree program was designed to meet the most recent U.S. Department of Homeland Security (DHS) and NSA guidelines.  

 
shadowmantxCommented:
0
 
tolinromeAuthor Commented:
I changed the private IP of the subnet on the remote end and problem solved.
0
 
tolinromeAuthor Commented:
I changed the private IP of the subnet on the remote end and problem solved.
0

Featured Post

Prepare for an Exciting Career in Cybersecurity

Help prevent cyber-threats and provide solutions to safeguard our global digital economy. Earn your MS in Cybersecurity. WGU’s MSCSIA degree program curriculum features two internationally recognized certifications from the EC-Council at no additional time or cost.

  • 4
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now