I've got a number of Centos/XEN servers connecting over fibre to my SUN Storagetek SAN with native multipath. The configuration seems to work fine and failover testing successful.
However, I'm getting errors on boot (see attached doc with screenshots)
The question is - should I be worried about this or is it normal?
Here's the multipath output also.
[root@hv03 ~]# multipath -ll
edbfa4dd) dm-5 QNAP,iSCSI Storage [size=2.0T][features=0][hw
\_ round-robin 0 [prio=1][active]
\_ 15:0:0:0 sde 8:64 [active][ready]
4e9f3e20) dm-2 SUN,CSM200_R
r=1 rdac][rw] \_ round-robin 0 [prio=100][active] \_ 4:0:0:0 sdc 8:32 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 3:0:0:0 sdb 8:16 [active][ghost]