Cisco 5510 8.4 - VPN access another subnet

Hello. Our main subnet is 10.10.1.0, we have a point to point T1 going to another location with a 10.10.15.0 subnet. How do we allow VPNs to access that subnet?

I did add it to a split tunnel list, and it does show up as a secured route in Anyconnect. packet trace shows it goes through, but when I try it, it does not??

Thanks.

I can post config, but just looking for someone to tell me exactly what I need to plug in.
arthurk123Asked:
Who is Participating?
 
John MeggersNetwork ArchitectCommented:
Does the device you're accessing on the 10.10.15.0 subnet know where the VPN address pool is located?  Sounds to me like it perhaps doesn't know where to send traffic back to the VPN.  
0
 
arthurk123Author Commented:
Great advice, hadn't thought of that

We will be accessing several devices (RDP)

Currently we have a static route, for 10.10.1.0 255.255.255.0 gateway 10.10.15.3. I've tried setting up 10.10.5.0 255.255.255.0 gateway 10.10.1.1 (ASA) but it won't take route. I tried setting gateway for 10.10.5.0 to 10.10.15.3 but it wouldn't route

Thanks..
0
 
arthurk123Author Commented:
Added 10.10.5.0 255.255.255.0 gateway 10.10.15.3 to the firewall on .15  subnet

then added 10.10.5.0 255.255.255.0 gateway 10.10.72.1 to PTP router on 10.10.15.3
then added 10.10.5.0 255.255.255.0 gateway 10.10.1.1 to PTP router on 10.10.1.3

and it worked, so you are right, traffic just didn't know how to come back

Thanks!
0
 
arthurk123Author Commented:
Thanks!
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.