ethernet to USB

Hello. I want to use an Ethernet to USB device to connect a Phone remotely to a PC elsewhere on our network. (I’m thinking of using an Anywhere USB http://www.digi.com/products/usb/anywhereusb#overview) or the like. The problem is that this is a phone test application and we will be switching several different phones / hour onto the same USB line (one at a time)

My question is: Can an Ethernet to USB device like this cope with devices being remove and re-connected to a single USB port like this?

Thanks in advance
NicklebackAsked:
Who is Participating?
 
IanThCommented:
so what I mean is its got a usb chip just like a pc so if a pc works that way sp will this device
0
 
IanThCommented:
they are quite common as they are used for virtualisation as usb to a vm is imposible so its needs to be done this way so why wont it work is my question
0
 
NicklebackAuthor Commented:
Makes sence. Is sounds like the PC sees the remote USB as just another USB.
0
 
NicklebackAuthor Commented:
Thanks for the help IanTh

Regards
 Nickkle
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.