Cisco logging command
Posted on 2011-10-31
On a 3560 switch I want to disable logging for 10.1.10.39
I do the following:
router# show snmp
SNMP Logging: enabled
Logging to 10.1.10.39.162, 0/10, 17 sent, 0 dropped.
Logging to 10.1.0.10.162, 0/10, 165 sent, 0 dropped.
I then do the following:
router<config>#no logging 10.1.10.39
Host 10.1.10.39 not found for logging
How can no logging be found when it says before there is logging for this host? I would like to remove it.