simonlai
asked on
Reason caused RHEL 3 server auto restart?
Hi:
My server was automatic restart this afternoon and i was not to figure out what problems caused.
Can any advice how can i figure out the reasons caused the server restart? Any possibility?
*I do not set at cron job restart the server.
Thanks
My server was automatic restart this afternoon and i was not to figure out what problems caused.
Can any advice how can i figure out the reasons caused the server restart? Any possibility?
*I do not set at cron job restart the server.
Thanks
I would not put restarting in cron but there may be circumstances that may dictate that.
Can you post some of the system logs? Without any information, it is difficult to say.
Could be that the server overheated and BIOS forced it, that there was a power issue that caused it to reboot, it could be that there was a program that crashed the system and that prompted the reboot. I mean, it could be one of many many different things. It would be like going "My car doesn't work, what is wrong with it"
Could be that the server overheated and BIOS forced it, that there was a power issue that caused it to reboot, it could be that there was a program that crashed the system and that prompted the reboot. I mean, it could be one of many many different things. It would be like going "My car doesn't work, what is wrong with it"
May be I misinterpret your comment.
A server can restart for a variety of reasons.
First, you have to analyse the logs. In RHEL 3, I don't think "last" was configured by default. You need to know what were the last commands issued.
Is there any corruption in any file system or is to too full?
Is there a problem with your server hardware itself? Overheating?
A server can restart for a variety of reasons.
First, you have to analyse the logs. In RHEL 3, I don't think "last" was configured by default. You need to know what were the last commands issued.
Is there any corruption in any file system or is to too full?
Is there a problem with your server hardware itself? Overheating?
ASKER
Hellmark:
which log want me to post? dmesg? boot?
farzanj:
"last" command output:
root pts/1 203.120.17.98 Wed Nov 2 00:19 still logged in
root pts/1 203.120.17.98 Wed Nov 2 00:05 - 00:15 (00:09)
root pts/0 203.120.17.98 Tue Nov 1 23:33 still logged in
root pts/0 203.120.17.98 Tue Nov 1 17:53 - 18:02 (00:08)
reboot system boot 2.4.21-4.ELsmp Tue Nov 1 15:23 (08:58)
wtmp begins Tue Nov 1 15:23:19 2011
I double check the on the file and disk size, not corrupt and is not full.
how to check which hardware failure?
Thanks.
which log want me to post? dmesg? boot?
farzanj:
"last" command output:
root pts/1 203.120.17.98 Wed Nov 2 00:19 still logged in
root pts/1 203.120.17.98 Wed Nov 2 00:05 - 00:15 (00:09)
root pts/0 203.120.17.98 Tue Nov 1 23:33 still logged in
root pts/0 203.120.17.98 Tue Nov 1 17:53 - 18:02 (00:08)
reboot system boot 2.4.21-4.ELsmp Tue Nov 1 15:23 (08:58)
wtmp begins Tue Nov 1 15:23:19 2011
I double check the on the file and disk size, not corrupt and is not full.
how to check which hardware failure?
Thanks.
ASKER
Hellmark:
How can i check whether is software crash?? power issues?
i do not install new software since day one, and it was running well previously. So i do not think is software conflict problems.
Thanks.
How can i check whether is software crash?? power issues?
i do not install new software since day one, and it was running well previously. So i do not think is software conflict problems.
Thanks.
I don't know what kind of server you are using. Are there any agents configured on it?
The OS is pretty old so I am suspecting the server is too. From the logs you can know the timings it shut down. How often does it?
Try doing a physical inspection right away.
The OS is pretty old so I am suspecting the server is too. From the logs you can know the timings it shut down. How often does it?
Try doing a physical inspection right away.
I don't think it is a software conflict in the sense that one program caused another program to crash, but I was just saying that you could have experienced and issue where a bug from a program caused a crash that took down the system.
As far as where to start, look at your system logs.
As far as where to start, look at your system logs.
But in that case there should you some logs maintained you may be you could raise the logging level in your syslog
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
farzanj:
Yes. the server is about 5 year. It just happen yesterday.
Yes. the server is about 5 year. It just happen yesterday.
ASKER
The server restart again this morning:
below was the log:
Nov 2 09:45:27 jurassic syslogd 1.4.1: restart.
Nov 2 09:45:27 jurassic syslog: syslogd startup succeeded
Nov 2 09:45:27 jurassic kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 2 09:45:27 jurassic kernel: Linux version 2.4.21-4.ELsmp (bhcompile@daffy.perf.redh
Nov 2 09:45:27 jurassic kernel: BIOS-provided physical RAM map:
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000bffc0000 - 00000000bffcfc00 (ACPI data)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000bffcfc00 - 00000000bffff000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Nov 2 09:45:27 jurassic kernel: 4224MB HIGHMEM available.
Nov 2 09:45:27 jurassic kernel: 896MB LOWMEM available.
Nov 2 09:45:27 jurassic kernel: found SMP MP-table at 000fe710
Nov 2 09:45:27 jurassic kernel: hm, page 000fe000 reserved twice.
Nov 2 09:45:27 jurassic kernel: hm, page 000ff000 reserved twice.
Nov 2 09:45:27 jurassic kernel: hm, page 000f0000 reserved twice.
Nov 2 09:45:27 jurassic kernel: On node 0 totalpages: 1310720
Nov 2 09:45:27 jurassic kernel: zone(0): 4096 pages.
Nov 2 09:45:27 jurassic kernel: zone(1): 225280 pages.
Nov 2 09:45:27 jurassic kernel: zone(2): 1081344 pages.
Nov 2 09:45:27 jurassic kernel: ACPI: Searched entire block, no RSDP was found.
Nov 2 09:45:27 jurassic kernel: ACPI: RSDP located at physical address c00fd5b0
Nov 2 09:45:27 jurassic syslog: klogd startup succeeded
Nov 2 09:45:27 jurassic kernel: RSD PTR v0 [DELL ]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd5c4, 0x68): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: RSDT v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd620, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd620, 0x74): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: FACP v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: APIC v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0002] id[0x6] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0003] id[0x1] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0004] id[0x7] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0005] id[0x2] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 4 (0x0200) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0006] id[0x4] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 5 (0x0400) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0007] id[0x3] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 6 (0x0300) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0008] id[0x5] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 7 (0x0500) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0004] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0005] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0006] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0007] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0008] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 2 09:45:27 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0x9] address[0xfec80000] global_irq_base[0x20])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0xa] address[0xfec83000] global_irq_base[0x40])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0xb] address[0xfec84000] global_irq_base[0x60])
Nov 2 09:45:27 jurassic kernel: 8 CPUs total
Nov 2 09:45:27 jurassic kernel: Local APIC address fee00000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd774, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd774, 0x50): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: SPCR v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7c4, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7c4, 0x38): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: HPET v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: ACPI: Unsupported table HPET
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7fc, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7fc, 0x3c): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: MCFG v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: ACPI: Unsupported table MCFG
Nov 2 09:45:27 jurassic kernel: Enabling the CPU's according to the ACPI table
Nov 2 09:45:27 jurassic kernel: Intel MultiProcessor Specification v1.4
Nov 2 09:45:27 jurassic kernel: Virtual Wire compatibility mode.
Nov 2 09:45:27 jurassic kernel: OEM ID: DELL Product ID: PE 016D APIC at: 0xFEE00000
Nov 2 09:45:27 jurassic kernel: I/O APIC #8 Version 32 at 0xFEC00000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #9 Version 32 at 0xFEC80000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #10 Version 32 at 0xFEC83000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #11 Version 32 at 0xFEC84000.
Nov 2 09:45:27 jurassic kernel: Processors: 4
Nov 2 09:45:27 jurassic kernel: xAPIC support is present
Nov 2 09:45:27 jurassic kernel: Enabling APIC mode: Flat.^IUsing 4 I/O APICs
Nov 2 09:45:27 jurassic kernel: Kernel command line: ro root=LABEL=/ apic
Nov 2 09:45:27 jurassic kernel: Initializing CPU#0
Nov 2 09:45:27 jurassic kernel: Detected 2992.599 MHz processor.
Nov 2 09:45:27 jurassic kernel: Console: colour VGA+ 80x25
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: Memory: 4107480k/5242880k available (1683k kernel code, 81960k reserved, 1318k data, 224k init, 3276544k highmem)
Nov 2 09:45:27 jurassic kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: Inode cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 2 09:45:27 jurassic kernel: Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes)
Nov 2 09:45:27 jurassic kernel: Page-cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check architecture supported.
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:45:27 jurassic kernel: Enabling fast FPU save and restore... done.
Nov 2 09:45:27 jurassic kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 2 09:45:27 jurassic kernel: Checking 'hlt' instruction... OK.
Nov 2 09:45:27 jurassic kernel: POSIX conformance testing by UNIFIX
Nov 2 09:45:27 jurassic kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 2 09:45:27 jurassic kernel: mtrr: detected mtrr type: Intel
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:45:27 jurassic kernel: CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: per-CPU timeslice cutoff: 2925.83 usecs.
Nov 2 09:45:27 jurassic kernel: task migration cache decay timeout: 10 msecs.
Nov 2 09:45:27 jurassic kernel: enabled ExtINT on CPU#0
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Booting processor 1/1 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#1
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#1
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: ACPI tables and CPU MSR values mismatch about cpu number
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#1.
Nov 2 09:45:27 jurassic kernel: CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Booting processor 2/6 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#2
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#2
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#2.
Nov 2 09:45:27 jurassic kernel: CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Booting processor 3/7 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#3
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#3
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#3.
Nov 2 09:45:27 jurassic kernel: CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Total of 4 processors activated (23907.53 BogoMIPS).
Nov 2 09:45:27 jurassic kernel: ENABLING IO-APIC IRQs
Nov 2 09:45:27 jurassic kernel: Setting 8 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 9 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 9 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 10 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 10 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 11 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 11 ... ok.
Nov 2 09:45:27 jurassic kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 2 09:45:27 jurassic kernel: testing the IO APIC......................
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: An unexpected IO-APIC was found. If this kernel release is less than
Nov 2 09:45:27 jurassic kernel: three months old please report this to linux-smp@vger.kernel.org
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic last message repeated 2 times
Nov 2 09:45:27 jurassic kernel: ..........................
Nov 2 09:45:27 jurassic kernel: Using local APIC timer interrupts.
Nov 2 09:45:27 jurassic kernel: calibrating APIC timer ...
Nov 2 09:45:27 jurassic kernel: ..... CPU clock speed is 2992.4802 MHz.
Nov 2 09:45:27 jurassic kernel: ..... host bus clock speed is 199.4985 MHz.
Nov 2 09:45:27 jurassic kernel: cpu: 0, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: CPU0<T0:1994976,T1:1595968
Nov 2 09:45:27 jurassic kernel: cpu: 1, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: cpu: 2, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: cpu: 3, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: CPU1<T0:1994976,T1:1196976
Nov 2 09:45:27 jurassic kernel: CPU2<T0:1994976,T1:797984,
Nov 2 09:45:27 jurassic kernel: CPU3<T0:1994976,T1:398976,
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[0] = 2
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[1] = 3
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[2] = 0
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[3] = 1
Nov 2 09:45:27 jurassic kernel: mapping CPU#0's runqueue to CPU#2's runqueue.
Nov 2 09:45:27 jurassic kernel: mapping CPU#1's runqueue to CPU#3's runqueue.
Nov 2 09:45:27 jurassic kernel: zapping low mappings.
Nov 2 09:45:27 jurassic kernel: Process timing init...done.
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 0
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 1
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 2
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 3
Nov 2 09:45:27 jurassic kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=11
Nov 2 09:45:27 jurassic kernel: PCI: Using configuration type 1
Nov 2 09:45:27 jurassic kernel: PCI: Probing PCI hardware
Nov 2 09:45:27 jurassic kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Nov 2 09:45:27 jurassic kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Nov 2 09:45:27 jurassic kernel: PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I4,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I5,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I6,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B2,I14,P0) -> 38
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B6,I7,P0) -> 48
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B7,I8,P0) -> 49
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P0) -> 20
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P1) -> 21
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I6,P0) -> 23
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I13,P0) -> 18
Nov 2 09:45:27 jurassic kernel: isapnp: Scanning for PnP cards...
Nov 2 09:45:27 jurassic kernel: isapnp: No Plug & Play device found
Nov 2 09:45:27 jurassic kernel: Linux NET4.0 for Linux 2.4
Nov 2 09:45:27 jurassic kernel: Based upon Swansea University Computer Society NET3.039
Nov 2 09:45:27 jurassic kernel: Initializing RT netlink socket
Nov 2 09:45:27 jurassic kernel: apm: BIOS not found.
Nov 2 09:45:27 jurassic kernel: Total HugeTLB memory allocated, 0
Nov 2 09:45:27 jurassic kernel: Starting kswapd
Nov 2 09:45:27 jurassic kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Nov 2 09:45:27 jurassic kernel: VFS: Disk quotas vdquot_6.5.1
Nov 2 09:45:27 jurassic kernel: aio_setup: num_physpages = 327680
Nov 2 09:45:27 jurassic kernel: aio_setup: sizeof(struct page) = 60
Nov 2 09:45:27 jurassic kernel: Hugetlbfs mounted.
Nov 2 09:45:27 jurassic kernel: pty: 2048 Unix98 ptys configured
Nov 2 09:45:27 jurassic kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 2 09:45:27 jurassic kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Nov 2 09:45:27 jurassic kernel: Real Time Clock Driver v1.10e
Nov 2 09:45:27 jurassic kernel: NET4: Frame Diverter 0.46
Nov 2 09:45:27 jurassic kernel: RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Nov 2 09:45:27 jurassic kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 2 09:45:27 jurassic kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 2 09:45:27 jurassic kernel: ICH5: IDE controller at PCI slot 00:1f.1
Nov 2 09:45:27 jurassic kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Nov 2 09:45:27 jurassic kernel: ICH5: chipset revision 2
Nov 2 09:45:27 jurassic kernel: ICH5: not 100%% native mode: will probe irqs later
Nov 2 09:45:27 jurassic kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 2 09:45:27 jurassic kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Nov 2 09:45:27 jurassic kernel: SiI680: IDE controller at PCI slot 0b:06.0
Nov 2 09:45:27 jurassic kernel: SiI680: chipset revision 2
Nov 2 09:45:27 jurassic kernel: SiI680: BASE CLOCK == 100
Nov 2 09:45:27 jurassic kernel: SiI680: 100%% native mode on irq 23
Nov 2 09:45:27 jurassic kernel: ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Nov 2 09:45:27 jurassic kernel: ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Nov 2 09:45:27 jurassic kernel: hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
Nov 2 09:45:27 jurassic kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 2 09:45:27 jurassic kernel: md: Autodetecting RAID arrays.
Nov 2 09:45:27 jurassic kernel: md: autorun ...
Nov 2 09:45:27 jurassic kernel: md: ... autorun DONE.
Nov 2 09:45:27 jurassic kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 2 09:45:27 jurassic kernel: Initializing Cryptographic API
Nov 2 09:45:27 jurassic kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 2 09:45:27 jurassic kernel: IP: routing cache hash table of 65536 buckets, 512Kbytes
Nov 2 09:45:27 jurassic kernel: TCP: Hash tables configured (established 524288 bind 65536)
Nov 2 09:45:27 jurassic kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 2 09:45:27 jurassic kernel: Initializing IPsec netlink socket
Nov 2 09:45:27 jurassic kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 2 09:45:27 jurassic kernel: RAMDISK: Compressed image found at block 0
Nov 2 09:45:27 jurassic kernel: Freeing initrd memory: 348k freed
Nov 2 09:45:27 jurassic kernel: VFS: Mounted root (ext2 filesystem).
Nov 2 09:45:27 jurassic kernel: SCSI subsystem driver Revision: 1.00
Nov 2 09:45:27 jurassic kernel: megaraid: v2.10.7 (Release Date: Sat Jun 5 02:32:59 EDT 2004)
Nov 2 09:45:27 jurassic irqbalance: irqbalance startup succeeded
Nov 2 09:45:27 jurassic kernel: megaraid: found 0x1028:0x0013:bus 2:slot 14:func 0
Nov 2 09:45:27 jurassic kernel: scsi0:Found MegaRAID controller at 0xf8843000, IRQ:38
Nov 2 09:45:27 jurassic kernel: megaraid: [513O:H418] detected 1 logical drives.
Nov 2 09:45:27 jurassic kernel: megaraid: supports extended CDBs.
Nov 2 09:45:27 jurassic kernel: megaraid: channel[0] is raid.
Nov 2 09:45:27 jurassic kernel: megaraid: channel[1] is raid.
Nov 2 09:45:27 jurassic kernel: scsi0 : LSI Logic MegaRAID 513O 254 commands 16 targs 5 chans 7 luns
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue c7526218, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 0 for logical drives.
Nov 2 09:45:27 jurassic kernel: Vendor: MegaRAID Model: LD 0 RAID5 349G Rev: 513O
Nov 2 09:45:27 jurassic kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue c7526018, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 1 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 2 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 3 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 4 [P0] for physical devices.
Nov 2 09:45:27 jurassic kernel: Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Nov 2 09:45:27 jurassic kernel: Type: Processor ANSI SCSI revision: 02
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue f65b4e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 5 [P1] for physical devices.
Nov 2 09:45:27 jurassic kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 2 09:45:27 jurassic kernel: SCSI device sda: 715571200 512-byte hdwr sectors (366372 MB)
Nov 2 09:45:27 jurassic kernel: Partition check:
Nov 2 09:45:27 jurassic kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Nov 2 09:45:27 jurassic kernel: Red Hat/Adaptec aacraid driver (1.1-4 Dec 15 2003 21:20:04)
Nov 2 09:45:27 jurassic kernel: Journalled Block Device driver loaded
Nov 2 09:45:27 jurassic kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 2 09:45:27 jurassic kernel: EXT3-fs: write access will be enabled during recovery.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3-fs: sd(8,10): orphan cleanup on readonly fs
Nov 2 09:45:27 jurassic kernel: EXT3-fs: sd(8,10): 2 orphan inodes deleted
Nov 2 09:45:27 jurassic kernel: EXT3-fs: recovery complete.
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: Freeing unused kernel memory: 224k freed
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver usbdevfs
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hub
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: $Revision: 1.275 $ time 18:08:43 Oct 3 2003
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: High bandwidth mode enabled
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbce0, IRQ 16
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbcc0, IRQ 19
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbca0, IRQ 18
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: Intel Corp. 82801EB USB2
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: irq 23, pci mem f88a0000
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Nov 2 09:45:27 jurassic kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
Nov 2 09:45:27 jurassic kernel: PCI: 00:1d.7 PCI cache line size corrected to 128.
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 6 ports detected
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hiddev
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hid
Nov 2 09:45:27 jurassic kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Nov 2 09:45:27 jurassic kernel: hid-core.c: USB HID support drivers
Nov 2 09:45:27 jurassic kernel: mice: PS/2 mouse device common for all mice
Nov 2 09:45:27 jurassic kernel: hub.c: connect-debounce failed, port 1 disabled
Nov 2 09:45:27 jurassic kernel: hub.c: new USB device 00:1d.7-3, assigned address 2
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
Nov 2 09:45:27 jurassic kernel: input0: USB HID v1.10 Keyboard [Dell DRAC4] on usb1:2.0
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: interrupt, status 2, frame# 756
Nov 2 09:45:27 jurassic kernel: input1: USB HID v1.10 Mouse [Dell DRAC4] on usb1:2.1
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
Nov 2 09:45:27 jurassic kernel: Adding Swap: 2096440k swap-space (priority -1)
Nov 2 09:45:27 jurassic kernel: Adding Swap: 2096440k swap-space (priority -2)
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f6789c80, burb f541df00
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f676a980, burb f541df00
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f6789c80, burb f541df00
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: hda: attached ide-cdrom driver.
Nov 2 09:45:27 jurassic kernel: hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 2 09:45:27 jurassic kernel: Uniform CD-ROM driver Revision: 3.12
Nov 2 09:45:27 jurassic kernel: hda: DMA disabled
Nov 2 09:45:27 jurassic kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Nov 2 09:45:27 jurassic kernel: inserting floppy driver for 2.4.21-4.ELsmp
Nov 2 09:45:27 jurassic kernel: FDC 0 is a National Semiconductor PC87306
Nov 2 09:45:27 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:45:27 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:45:27 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:45:27 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:45:27 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:45:27 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:45:27 jurassic portmap: portmap startup succeeded
Nov 2 09:45:27 jurassic rpc.statd[1535]: Version 1.0.5 Starting
Nov 2 09:45:31 jurassic kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
Nov 2 09:46:24 jurassic rpc.statd[1535]: gethostbyname error for jurassic.eurocoptersea.com
Nov 2 09:46:24 jurassic nfslock: rpc.statd startup succeeded
Nov 2 09:46:24 jurassic keytable:
Nov 2 09:46:24 jurassic keytable: Loading system font:
Nov 2 09:46:24 jurassic keytable:
Nov 2 09:46:24 jurassic rc: Starting keytable: succeeded
Nov 2 09:46:24 jurassic racsvc: S20racsvc start succeeded
Nov 2 09:46:24 jurassic random: Initializing random number generator: succeeded
Nov 2 09:46:24 jurassic rc: Starting pcmcia: succeeded
Nov 2 09:46:24 jurassic netfs: Mounting other filesystems: succeeded
Nov 2 09:46:24 jurassic autofs: automount startup succeeded
Nov 2 09:46:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:46:26 jurassic insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
Nov 2 09:46:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:46:26 jurassic kernel: lp: driver loaded but no devices found
Nov 2 09:46:26 jurassic modprobe: modprobe: Can't locate module char-major-188
Nov 2 09:46:26 jurassic last message repeated 15 times
Nov 2 09:46:26 jurassic cups: cupsd startup succeeded
Nov 2 09:46:26 jurassic named[1728]: starting BIND 9.2.2 -u named
Nov 2 09:46:26 jurassic named[1728]: using 4 CPUs
Nov 2 09:46:26 jurassic named: named startup succeeded
Nov 2 09:46:26 jurassic named[1728]: loading configuration from '/etc/named.conf'
Nov 2 09:46:26 jurassic named[1728]: no IPv6 interfaces found
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0, 172.16.1.11#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:1, 172.16.1.12#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:2, 172.16.1.13#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:3, 172.16.1.14#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:4, 172.16.1.15#53
Nov 2 09:46:26 jurassic named[1728]: command channel listening on 127.0.0.1#953
Nov 2 09:46:26 jurassic sshd: succeeded
Nov 2 09:46:27 jurassic xinetd: xinetd startup succeeded
Nov 2 09:46:27 jurassic vsftpd: true startup succeeded
Nov 2 09:46:28 jurassic sendmail: sendmail startup succeeded
Nov 2 09:46:28 jurassic sendmail: sm-client startup succeeded
Nov 2 09:46:28 jurassic xinetd[1758]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Nov 2 09:46:28 jurassic xinetd[1758]: Started working: 1 available service
Nov 2 09:46:28 jurassic gpm: gpm startup succeeded
Nov 2 09:46:30 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:46:30 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:46:30 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:46:30 jurassic httpd:
Nov 2 09:46:30 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:46:30 jurassic httpd: Enter pass phrase:
Nov 2 09:46:30 jurassic sshd(pam_unix)[1829]: session opened for user huy by (uid=502)
Nov 2 09:46:33 jurassic sshd(pam_unix)[1839]: session opened for user tancs by (uid=500)
Nov 2 09:47:01 jurassic sshd(pam_unix)[1847]: session opened for user root by (uid=0)
Nov 2 09:47:40 jurassic httpd: Apache:mod_ssl:Error: Private key not found.
Nov 2 09:47:40 jurassic httpd: **Stopped
Nov 2 09:47:40 jurassic httpd: httpd startup failed
Nov 2 09:47:41 jurassic httpd: httpd shutdown succeeded
Nov 2 09:47:41 jurassic crond: crond startup succeeded
Nov 2 09:47:42 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:47:42 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:47:42 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:47:42 jurassic httpd:
Nov 2 09:47:42 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:47:42 jurassic httpd: Enter pass phrase:
Nov 2 09:47:42 jurassic xfs: xfs startup succeeded
Nov 2 09:47:42 jurassic atd: atd startup succeeded
Nov 2 09:47:42 jurassic xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/c
Nov 2 09:47:42 jurassic instsvcdrv: dcdbas device driver loaded
Nov 2 09:47:43 jurassic instsvcdrv: dcdipm device driver loaded
Nov 2 09:47:45 jurassic omsad: omsad32 startup succeeded
Nov 2 09:47:45 jurassic httpd:
Nov 2 09:47:45 jurassic httpd: OK: Pass Phrase Dialog successful.
Nov 2 09:47:45 jurassic snmpd: snmpd startup succeeded
Nov 2 09:47:45 jurassic httpd: httpd startup succeeded
Nov 2 09:47:45 jurassic snmpd[2146]: NET-SNMP version 5.0.8
Nov 2 09:47:53 jurassic dataeng: dcstor32d startup succeeded
Nov 2 09:47:54 jurassic Server Administrator: Instrumentation Service EventID: 1000 Server Administrator starting
Nov 2 09:47:54 jurassic Server Administrator: Instrumentation Service EventID: 1001 Server Administrator startup complete
Nov 2 09:47:54 jurassic dataeng: dcevt32d startup succeeded
Nov 2 09:47:54 jurassic dataeng: dcsnmp32d startup succeeded
Nov 2 09:47:55 jurassic omawsd: omaws32 startup succeeded
Nov 2 09:47:55 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:47:57 jurassic snmpd[2146]: [smux_accept] accepted fd 11 from 127.0.0.1:32771
Nov 2 09:47:57 jurassic snmpd[2146]: accepted smux peer: oid SNMPv2-SMI::enterprises.67
Nov 2 09:48:02 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:02 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:02 jurassic kernel: Attached scsi generic sg1 at scsi0, channel 4, id 6, lun 0, type 3
Nov 2 09:48:16 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:22 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:26 jurassic Server Administrator: Storage Service EventID: 2164 See readme.txt for a list of validated controller driver versions.
Nov 2 09:48:26 jurassic Server Administrator: Storage Service EventID: 2131 The current firmware version 513O is older than the required firmware version 521Q for a controller of model PERC 4e/Di: Controller 0 (PERC 4e/Di)
Nov 2 09:48:27 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:28 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:41 jurassic sendmail: sendmail shutdown succeeded
Nov 2 09:48:41 jurassic sendmail: sm-client shutdown succeeded
Nov 2 09:48:42 jurassic sendmail: sendmail startup succeeded
Nov 2 09:48:42 jurassic sendmail: sm-client startup succeeded
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-22
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-22
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-33
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-33
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-34
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-34
Nov 2 09:48:44 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:44 jurassic last message repeated 9 times
Nov 2 09:48:44 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 7 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 9 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 9 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 3 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic last message repeated 18 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-174
Nov 2 09:48:45 jurassic last message repeated 15 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-204
Nov 2 09:48:45 jurassic last message repeated 6 times
Nov 2 09:49:22 jurassic sshd(pam_unix)[2921]: session opened for user tancs by (uid=500)
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2968 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2968 (lsusb) did not claim interface 1 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2978 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2978 (lsusb) did not claim interface 1 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2982 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2982 (lsusb) did not claim interface 1 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2986 (lsusb) did not claim interface 0 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2986 (lsusb) did not claim interface 1 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2990 (lsusb) did not claim interface 0 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2990 (lsusb) did not claim interface 1 before use
Nov 2 09:56:47 jurassic syslogd 1.4.1: restart.
Nov 2 09:56:47 jurassic syslog: syslogd startup succeeded
Nov 2 09:56:47 jurassic kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 2 09:56:47 jurassic kernel: Linux version 2.4.21-4.ELsmp (bhcompile@daffy.perf.redh
Nov 2 09:56:47 jurassic kernel: BIOS-provided physical RAM map:
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000bffc0000 - 00000000bffcfc00 (ACPI data)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000bffcfc00 - 00000000bffff000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Nov 2 09:56:47 jurassic kernel: 4224MB HIGHMEM available.
Nov 2 09:56:47 jurassic kernel: 896MB LOWMEM available.
Nov 2 09:56:47 jurassic syslog: klogd startup succeeded
Nov 2 09:56:47 jurassic kernel: found SMP MP-table at 000fe710
Nov 2 09:56:47 jurassic kernel: hm, page 000fe000 reserved twice.
Nov 2 09:56:47 jurassic kernel: hm, page 000ff000 reserved twice.
Nov 2 09:56:47 jurassic kernel: hm, page 000f0000 reserved twice.
Nov 2 09:56:47 jurassic kernel: On node 0 totalpages: 1310720
Nov 2 09:56:47 jurassic kernel: zone(0): 4096 pages.
Nov 2 09:56:47 jurassic kernel: zone(1): 225280 pages.
Nov 2 09:56:47 jurassic kernel: zone(2): 1081344 pages.
Nov 2 09:56:47 jurassic kernel: ACPI: Searched entire block, no RSDP was found.
Nov 2 09:56:47 jurassic kernel: ACPI: RSDP located at physical address c00fd5b0
Nov 2 09:56:47 jurassic kernel: RSD PTR v0 [DELL ]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd5c4, 0x68): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: RSDT v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd620, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd620, 0x74): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: FACP v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: APIC v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0002] id[0x6] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0003] id[0x1] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0004] id[0x7] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0005] id[0x2] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 4 (0x0200) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0006] id[0x4] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 5 (0x0400) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0007] id[0x3] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 6 (0x0300) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0008] id[0x5] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 7 (0x0500) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0004] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0005] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0006] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0007] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0008] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 2 09:56:47 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0x9] address[0xfec80000] global_irq_base[0x20])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0xa] address[0xfec83000] global_irq_base[0x40])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0xb] address[0xfec84000] global_irq_base[0x60])
Nov 2 09:56:47 jurassic kernel: 8 CPUs total
Nov 2 09:56:47 jurassic kernel: Local APIC address fee00000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd774, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd774, 0x50): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: SPCR v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7c4, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7c4, 0x38): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: HPET v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: ACPI: Unsupported table HPET
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7fc, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7fc, 0x3c): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: MCFG v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: ACPI: Unsupported table MCFG
Nov 2 09:56:47 jurassic kernel: Enabling the CPU's according to the ACPI table
Nov 2 09:56:47 jurassic kernel: Intel MultiProcessor Specification v1.4
Nov 2 09:56:47 jurassic kernel: Virtual Wire compatibility mode.
Nov 2 09:56:47 jurassic kernel: OEM ID: DELL Product ID: PE 016D APIC at: 0xFEE00000
Nov 2 09:56:47 jurassic kernel: I/O APIC #8 Version 32 at 0xFEC00000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #9 Version 32 at 0xFEC80000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #10 Version 32 at 0xFEC83000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #11 Version 32 at 0xFEC84000.
Nov 2 09:56:47 jurassic kernel: Processors: 4
Nov 2 09:56:47 jurassic kernel: xAPIC support is present
Nov 2 09:56:47 jurassic kernel: Enabling APIC mode: Flat.^IUsing 4 I/O APICs
Nov 2 09:56:47 jurassic kernel: Kernel command line: ro root=LABEL=/ apic
Nov 2 09:56:47 jurassic kernel: Initializing CPU#0
Nov 2 09:56:47 jurassic kernel: Detected 2992.626 MHz processor.
Nov 2 09:56:47 jurassic kernel: Console: colour VGA+ 80x25
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: Memory: 4107480k/5242880k available (1683k kernel code, 81960k reserved, 1318k data, 224k init, 3276544k highmem)
Nov 2 09:56:47 jurassic kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: Inode cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 2 09:56:47 jurassic kernel: Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes)
Nov 2 09:56:47 jurassic kernel: Page-cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check architecture supported.
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:56:47 jurassic kernel: Enabling fast FPU save and restore... done.
Nov 2 09:56:47 jurassic kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 2 09:56:47 jurassic kernel: Checking 'hlt' instruction... OK.
Nov 2 09:56:47 jurassic kernel: POSIX conformance testing by UNIFIX
Nov 2 09:56:47 jurassic kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 2 09:56:47 jurassic kernel: mtrr: detected mtrr type: Intel
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:56:47 jurassic kernel: CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: per-CPU timeslice cutoff: 2925.83 usecs.
Nov 2 09:56:47 jurassic kernel: task migration cache decay timeout: 10 msecs.
Nov 2 09:56:47 jurassic kernel: enabled ExtINT on CPU#0
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Booting processor 1/1 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#1
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#1
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: ACPI tables and CPU MSR values mismatch about cpu number
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#1.
Nov 2 09:56:47 jurassic kernel: CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Booting processor 2/6 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#2
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#2
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#2.
Nov 2 09:56:47 jurassic kernel: CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Booting processor 3/7 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#3
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#3
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#3.
Nov 2 09:56:47 jurassic kernel: CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Total of 4 processors activated (23907.53 BogoMIPS).
Nov 2 09:56:47 jurassic kernel: ENABLING IO-APIC IRQs
Nov 2 09:56:47 jurassic kernel: Setting 8 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 9 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 9 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 10 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 10 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 11 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 11 ... ok.
Nov 2 09:56:47 jurassic kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 2 09:56:47 jurassic kernel: testing the IO APIC......................
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: An unexpected IO-APIC was found. If this kernel release is less than
Nov 2 09:56:47 jurassic kernel: three months old please report this to linux-smp@vger.kernel.org
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic last message repeated 2 times
Nov 2 09:56:47 jurassic kernel: ..........................
Nov 2 09:56:47 jurassic kernel: Using local APIC timer interrupts.
Nov 2 09:56:47 jurassic kernel: calibrating APIC timer ...
Nov 2 09:56:47 jurassic kernel: ..... CPU clock speed is 2992.6414 MHz.
Nov 2 09:56:47 jurassic kernel: ..... host bus clock speed is 199.5092 MHz.
Nov 2 09:56:47 jurassic kernel: cpu: 0, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: CPU0<T0:1995088,T1:1596064
Nov 2 09:56:47 jurassic kernel: cpu: 1, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: cpu: 3, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: cpu: 2, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: CPU1<T0:1995088,T1:1197040
Nov 2 09:56:47 jurassic kernel: CPU2<T0:1995088,T1:798032,
Nov 2 09:56:47 jurassic kernel: CPU3<T0:1995088,T1:399008,
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[0] = 2
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[1] = 3
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[2] = 0
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[3] = 1
Nov 2 09:56:47 jurassic kernel: mapping CPU#0's runqueue to CPU#2's runqueue.
Nov 2 09:56:47 jurassic kernel: mapping CPU#1's runqueue to CPU#3's runqueue.
Nov 2 09:56:47 jurassic kernel: zapping low mappings.
Nov 2 09:56:47 jurassic kernel: Process timing init...done.
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 0
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 1
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 2
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 3
Nov 2 09:56:47 jurassic kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=11
Nov 2 09:56:47 jurassic kernel: PCI: Using configuration type 1
Nov 2 09:56:47 jurassic kernel: PCI: Probing PCI hardware
Nov 2 09:56:47 jurassic kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Nov 2 09:56:47 jurassic kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Nov 2 09:56:47 jurassic kernel: PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I4,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I5,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I6,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B2,I14,P0) -> 38
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B6,I7,P0) -> 48
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B7,I8,P0) -> 49
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P0) -> 20
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P1) -> 21
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I6,P0) -> 23
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I13,P0) -> 18
Nov 2 09:56:47 jurassic kernel: isapnp: Scanning for PnP cards...
Nov 2 09:56:47 jurassic kernel: isapnp: No Plug & Play device found
Nov 2 09:56:47 jurassic kernel: Linux NET4.0 for Linux 2.4
Nov 2 09:56:47 jurassic kernel: Based upon Swansea University Computer Society NET3.039
Nov 2 09:56:47 jurassic kernel: Initializing RT netlink socket
Nov 2 09:56:47 jurassic kernel: apm: BIOS not found.
Nov 2 09:56:47 jurassic kernel: Total HugeTLB memory allocated, 0
Nov 2 09:56:47 jurassic kernel: Starting kswapd
Nov 2 09:56:47 jurassic kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Nov 2 09:56:47 jurassic kernel: VFS: Disk quotas vdquot_6.5.1
Nov 2 09:56:47 jurassic kernel: aio_setup: num_physpages = 327680
Nov 2 09:56:47 jurassic kernel: aio_setup: sizeof(struct page) = 60
Nov 2 09:56:47 jurassic kernel: Hugetlbfs mounted.
Nov 2 09:56:47 jurassic kernel: pty: 2048 Unix98 ptys configured
Nov 2 09:56:47 jurassic kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 2 09:56:47 jurassic irqbalance: irqbalance startup succeeded
Nov 2 09:56:47 jurassic kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Nov 2 09:56:47 jurassic kernel: Real Time Clock Driver v1.10e
Nov 2 09:56:47 jurassic kernel: NET4: Frame Diverter 0.46
Nov 2 09:56:47 jurassic kernel: RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Nov 2 09:56:47 jurassic kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 2 09:56:47 jurassic kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 2 09:56:47 jurassic kernel: ICH5: IDE controller at PCI slot 00:1f.1
Nov 2 09:56:47 jurassic kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Nov 2 09:56:47 jurassic kernel: ICH5: chipset revision 2
Nov 2 09:56:47 jurassic kernel: ICH5: not 100%% native mode: will probe irqs later
Nov 2 09:56:47 jurassic kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 2 09:56:47 jurassic kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Nov 2 09:56:47 jurassic kernel: SiI680: IDE controller at PCI slot 0b:06.0
Nov 2 09:56:47 jurassic kernel: SiI680: chipset revision 2
Nov 2 09:56:47 jurassic kernel: SiI680: BASE CLOCK == 100
Nov 2 09:56:47 jurassic kernel: SiI680: 100%% native mode on irq 23
Nov 2 09:56:47 jurassic kernel: ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Nov 2 09:56:47 jurassic kernel: ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Nov 2 09:56:47 jurassic kernel: hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
Nov 2 09:56:47 jurassic kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 2 09:56:47 jurassic kernel: md: Autodetecting RAID arrays.
Nov 2 09:56:47 jurassic kernel: md: autorun ...
Nov 2 09:56:47 jurassic kernel: md: ... autorun DONE.
Nov 2 09:56:47 jurassic kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 2 09:56:47 jurassic kernel: Initializing Cryptographic API
Nov 2 09:56:47 jurassic kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 2 09:56:47 jurassic kernel: IP: routing cache hash table of 65536 buckets, 512Kbytes
Nov 2 09:56:47 jurassic kernel: TCP: Hash tables configured (established 524288 bind 65536)
Nov 2 09:56:47 jurassic kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 2 09:56:47 jurassic kernel: Initializing IPsec netlink socket
Nov 2 09:56:47 jurassic kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 2 09:56:47 jurassic kernel: RAMDISK: Compressed image found at block 0
Nov 2 09:56:47 jurassic kernel: Freeing initrd memory: 348k freed
Nov 2 09:56:47 jurassic kernel: VFS: Mounted root (ext2 filesystem).
Nov 2 09:56:47 jurassic kernel: SCSI subsystem driver Revision: 1.00
Nov 2 09:56:47 jurassic kernel: megaraid: v2.10.7 (Release Date: Sat Jun 5 02:32:59 EDT 2004)
Nov 2 09:56:47 jurassic kernel: megaraid: found 0x1028:0x0013:bus 2:slot 14:func 0
Nov 2 09:56:47 jurassic kernel: scsi0:Found MegaRAID controller at 0xf8843000, IRQ:38
Nov 2 09:56:47 jurassic kernel: megaraid: [513O:H418] detected 1 logical drives.
Nov 2 09:56:47 jurassic kernel: megaraid: supports extended CDBs.
Nov 2 09:56:47 jurassic kernel: megaraid: channel[0] is raid.
Nov 2 09:56:47 jurassic kernel: megaraid: channel[1] is raid.
Nov 2 09:56:47 jurassic kernel: scsi0 : LSI Logic MegaRAID 513O 254 commands 16 targs 5 chans 7 luns
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 0 for logical drives.
Nov 2 09:56:47 jurassic kernel: Vendor: MegaRAID Model: LD 0 RAID5 349G Rev: 513O
Nov 2 09:56:47 jurassic kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6c18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 1 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 2 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 3 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 4 [P0] for physical devices.
Nov 2 09:56:47 jurassic kernel: Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Nov 2 09:56:47 jurassic kernel: Type: Processor ANSI SCSI revision: 02
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 5 [P1] for physical devices.
Nov 2 09:56:47 jurassic kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 2 09:56:47 jurassic kernel: SCSI device sda: 715571200 512-byte hdwr sectors (366372 MB)
Nov 2 09:56:47 jurassic kernel: Partition check:
Nov 2 09:56:47 jurassic kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Nov 2 09:56:47 jurassic kernel: Red Hat/Adaptec aacraid driver (1.1-4 Dec 15 2003 21:20:04)
Nov 2 09:56:47 jurassic kernel: Journalled Block Device driver loaded
Nov 2 09:56:47 jurassic kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 2 09:56:47 jurassic kernel: EXT3-fs: write access will be enabled during recovery.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3-fs: sd(8,10): orphan cleanup on readonly fs
Nov 2 09:56:47 jurassic kernel: EXT3-fs: sd(8,10): 2 orphan inodes deleted
Nov 2 09:56:47 jurassic kernel: EXT3-fs: recovery complete.
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: Freeing unused kernel memory: 224k freed
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver usbdevfs
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hub
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: $Revision: 1.275 $ time 18:08:43 Oct 3 2003
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: High bandwidth mode enabled
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbce0, IRQ 16
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbcc0, IRQ 19
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbca0, IRQ 18
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: Intel Corp. 82801EB USB2
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: irq 23, pci mem f88a0000
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Nov 2 09:56:47 jurassic kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
Nov 2 09:56:47 jurassic kernel: PCI: 00:1d.7 PCI cache line size corrected to 128.
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 6 ports detected
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hiddev
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hid
Nov 2 09:56:47 jurassic kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Nov 2 09:56:47 jurassic kernel: hid-core.c: USB HID support drivers
Nov 2 09:56:47 jurassic kernel: mice: PS/2 mouse device common for all mice
Nov 2 09:56:47 jurassic kernel: hub.c: connect-debounce failed, port 1 disabled
Nov 2 09:56:47 jurassic kernel: hub.c: new USB device 00:1d.7-3, assigned address 2
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
Nov 2 09:56:47 jurassic kernel: input0: USB HID v1.10 Keyboard [Dell DRAC4] on usb1:2.0
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: interrupt, status 2, frame# 741
Nov 2 09:56:47 jurassic kernel: input1: USB HID v1.10 Mouse [Dell DRAC4] on usb1:2.1
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
Nov 2 09:56:47 jurassic kernel: Adding Swap: 2096440k swap-space (priority -1)
Nov 2 09:56:47 jurassic kernel: Adding Swap: 2096440k swap-space (priority -2)
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c74ce480, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c74ce480, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f5e80b80, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: hda: attached ide-cdrom driver.
Nov 2 09:56:47 jurassic kernel: hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 2 09:56:47 jurassic kernel: Uniform CD-ROM driver Revision: 3.12
Nov 2 09:56:47 jurassic kernel: hda: DMA disabled
Nov 2 09:56:47 jurassic kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Nov 2 09:56:47 jurassic kernel: inserting floppy driver for 2.4.21-4.ELsmp
Nov 2 09:56:47 jurassic kernel: FDC 0 is a National Semiconductor PC87306
Nov 2 09:56:47 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:56:47 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:56:47 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic portmap: portmap startup succeeded
Nov 2 09:56:47 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:56:47 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:56:47 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:56:47 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:56:47 jurassic rpc.statd[1532]: Version 1.0.5 Starting
Nov 2 09:56:51 jurassic kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
Nov 2 09:57:24 jurassic rpc.statd[1532]: gethostbyname error for jurassic.eurocoptersea.com
Nov 2 09:57:24 jurassic nfslock: rpc.statd startup succeeded
Nov 2 09:57:24 jurassic keytable: Loading keymap:
Nov 2 09:57:24 jurassic keytable:
Nov 2 09:57:24 jurassic keytable: Loading system font:
Nov 2 09:57:24 jurassic keytable:
Nov 2 09:57:24 jurassic rc: Starting keytable: succeeded
Nov 2 09:57:24 jurassic racsvc: S20racsvc start succeeded
Nov 2 09:57:24 jurassic random: Initializing random number generator: succeeded
Nov 2 09:57:24 jurassic rc: Starting pcmcia: succeeded
Nov 2 09:57:24 jurassic netfs: Mounting other filesystems: succeeded
Nov 2 09:57:24 jurassic autofs: automount startup succeeded
Nov 2 09:57:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:57:26 jurassic insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
Nov 2 09:57:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:57:26 jurassic kernel: lp: driver loaded but no devices found
Nov 2 09:57:26 jurassic modprobe: modprobe: Can't locate module char-major-188
Nov 2 09:57:26 jurassic last message repeated 15 times
Nov 2 09:57:26 jurassic cups: cupsd startup succeeded
Nov 2 09:57:26 jurassic named[1725]: starting BIND 9.2.2 -u named
Nov 2 09:57:26 jurassic named[1725]: using 4 CPUs
Nov 2 09:57:26 jurassic named: named startup succeeded
Nov 2 09:57:26 jurassic named[1725]: loading configuration from '/etc/named.conf'
Nov 2 09:57:26 jurassic named[1725]: no IPv6 interfaces found
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0, 172.16.1.11#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:1, 172.16.1.12#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:2, 172.16.1.13#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:3, 172.16.1.14#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:4, 172.16.1.15#53
Nov 2 09:57:26 jurassic named[1725]: command channel listening on 127.0.0.1#953
Nov 2 09:57:26 jurassic sshd: succeeded
Nov 2 09:57:26 jurassic xinetd: xinetd startup succeeded
Nov 2 09:57:27 jurassic vsftpd: true startup succeeded
Nov 2 09:57:27 jurassic sendmail: sendmail startup succeeded
Nov 2 09:57:27 jurassic sendmail: sm-client startup succeeded
Nov 2 09:57:27 jurassic gpm: gpm startup succeeded
Nov 2 09:57:28 jurassic xinetd[1755]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Nov 2 09:57:28 jurassic xinetd[1755]: Started working: 1 available service
Nov 2 09:57:30 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:57:30 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:57:30 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:57:30 jurassic httpd:
Nov 2 09:57:30 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:57:30 jurassic httpd: Enter pass phrase:
Nov 2 09:57:31 jurassic sshd(pam_unix)[1824]: session opened for user tancs by (uid=500)
Nov 2 09:57:35 jurassic sshd(pam_unix)[1834]: session opened for user huy by (uid=502)
Nov 2 09:57:39 jurassic sshd(pam_unix)[1842]: session opened for user root by (uid=0)
below was the log:
Nov 2 09:45:27 jurassic syslogd 1.4.1: restart.
Nov 2 09:45:27 jurassic syslog: syslogd startup succeeded
Nov 2 09:45:27 jurassic kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 2 09:45:27 jurassic kernel: Linux version 2.4.21-4.ELsmp (bhcompile@daffy.perf.redh
Nov 2 09:45:27 jurassic kernel: BIOS-provided physical RAM map:
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000bffc0000 - 00000000bffcfc00 (ACPI data)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000bffcfc00 - 00000000bffff000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 2 09:45:27 jurassic kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Nov 2 09:45:27 jurassic kernel: 4224MB HIGHMEM available.
Nov 2 09:45:27 jurassic kernel: 896MB LOWMEM available.
Nov 2 09:45:27 jurassic kernel: found SMP MP-table at 000fe710
Nov 2 09:45:27 jurassic kernel: hm, page 000fe000 reserved twice.
Nov 2 09:45:27 jurassic kernel: hm, page 000ff000 reserved twice.
Nov 2 09:45:27 jurassic kernel: hm, page 000f0000 reserved twice.
Nov 2 09:45:27 jurassic kernel: On node 0 totalpages: 1310720
Nov 2 09:45:27 jurassic kernel: zone(0): 4096 pages.
Nov 2 09:45:27 jurassic kernel: zone(1): 225280 pages.
Nov 2 09:45:27 jurassic kernel: zone(2): 1081344 pages.
Nov 2 09:45:27 jurassic kernel: ACPI: Searched entire block, no RSDP was found.
Nov 2 09:45:27 jurassic kernel: ACPI: RSDP located at physical address c00fd5b0
Nov 2 09:45:27 jurassic syslog: klogd startup succeeded
Nov 2 09:45:27 jurassic kernel: RSD PTR v0 [DELL ]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd5c4, 0x68): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: RSDT v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd620, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd620, 0x74): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: FACP v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: APIC v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0002] id[0x6] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0003] id[0x1] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0004] id[0x7] enabled[1])
Nov 2 09:45:27 jurassic kernel: CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:4] APIC version 20
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0005] id[0x2] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 4 (0x0200) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0006] id[0x4] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 5 (0x0400) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0007] id[0x3] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 6 (0x0300) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC (acpi_id[0x0008] id[0x5] enabled[0])
Nov 2 09:45:27 jurassic kernel: CPU 7 (0x0500) disabled
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0004] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0005] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0006] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0007] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: LAPIC_NMI (acpi_id[0x0008] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:45:27 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 2 09:45:27 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0x9] address[0xfec80000] global_irq_base[0x20])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0xa] address[0xfec83000] global_irq_base[0x40])
Nov 2 09:45:27 jurassic kernel: IOAPIC (id[0xb] address[0xfec84000] global_irq_base[0x60])
Nov 2 09:45:27 jurassic kernel: 8 CPUs total
Nov 2 09:45:27 jurassic kernel: Local APIC address fee00000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd774, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd774, 0x50): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: SPCR v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7c4, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7c4, 0x38): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: HPET v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: ACPI: Unsupported table HPET
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7fc, 0x24): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: __va_range(0xfd7fc, 0x3c): idx=33 mapped at fffdd000
Nov 2 09:45:27 jurassic kernel: ACPI table found: MCFG v1 [DELL PE BKC 0.1]
Nov 2 09:45:27 jurassic kernel: ACPI: Unsupported table MCFG
Nov 2 09:45:27 jurassic kernel: Enabling the CPU's according to the ACPI table
Nov 2 09:45:27 jurassic kernel: Intel MultiProcessor Specification v1.4
Nov 2 09:45:27 jurassic kernel: Virtual Wire compatibility mode.
Nov 2 09:45:27 jurassic kernel: OEM ID: DELL Product ID: PE 016D APIC at: 0xFEE00000
Nov 2 09:45:27 jurassic kernel: I/O APIC #8 Version 32 at 0xFEC00000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #9 Version 32 at 0xFEC80000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #10 Version 32 at 0xFEC83000.
Nov 2 09:45:27 jurassic kernel: I/O APIC #11 Version 32 at 0xFEC84000.
Nov 2 09:45:27 jurassic kernel: Processors: 4
Nov 2 09:45:27 jurassic kernel: xAPIC support is present
Nov 2 09:45:27 jurassic kernel: Enabling APIC mode: Flat.^IUsing 4 I/O APICs
Nov 2 09:45:27 jurassic kernel: Kernel command line: ro root=LABEL=/ apic
Nov 2 09:45:27 jurassic kernel: Initializing CPU#0
Nov 2 09:45:27 jurassic kernel: Detected 2992.599 MHz processor.
Nov 2 09:45:27 jurassic kernel: Console: colour VGA+ 80x25
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: Memory: 4107480k/5242880k available (1683k kernel code, 81960k reserved, 1318k data, 224k init, 3276544k highmem)
Nov 2 09:45:27 jurassic kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: Inode cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 2 09:45:27 jurassic kernel: Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes)
Nov 2 09:45:27 jurassic kernel: Page-cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check architecture supported.
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:45:27 jurassic kernel: Enabling fast FPU save and restore... done.
Nov 2 09:45:27 jurassic kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 2 09:45:27 jurassic kernel: Checking 'hlt' instruction... OK.
Nov 2 09:45:27 jurassic kernel: POSIX conformance testing by UNIFIX
Nov 2 09:45:27 jurassic kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 2 09:45:27 jurassic kernel: mtrr: detected mtrr type: Intel
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:45:27 jurassic kernel: CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: per-CPU timeslice cutoff: 2925.83 usecs.
Nov 2 09:45:27 jurassic kernel: task migration cache decay timeout: 10 msecs.
Nov 2 09:45:27 jurassic kernel: enabled ExtINT on CPU#0
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Booting processor 1/1 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#1
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#1
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: ACPI tables and CPU MSR values mismatch about cpu number
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#1.
Nov 2 09:45:27 jurassic kernel: CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Booting processor 2/6 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#2
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#2
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#2.
Nov 2 09:45:27 jurassic kernel: CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Booting processor 3/7 eip 2000
Nov 2 09:45:27 jurassic kernel: Initializing CPU#3
Nov 2 09:45:27 jurassic kernel: masked ExtINT on CPU#3
Nov 2 09:45:27 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:45:27 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:45:27 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:45:27 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:45:27 jurassic kernel: Intel machine check reporting enabled on CPU#3.
Nov 2 09:45:27 jurassic kernel: CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:45:27 jurassic kernel: Total of 4 processors activated (23907.53 BogoMIPS).
Nov 2 09:45:27 jurassic kernel: ENABLING IO-APIC IRQs
Nov 2 09:45:27 jurassic kernel: Setting 8 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 9 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 9 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 10 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 10 ... ok.
Nov 2 09:45:27 jurassic kernel: Setting 11 in the phys_id_present_map
Nov 2 09:45:27 jurassic kernel: ...changing IO-APIC physical APIC ID to 11 ... ok.
Nov 2 09:45:27 jurassic kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 2 09:45:27 jurassic kernel: testing the IO APIC......................
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic kernel: An unexpected IO-APIC was found. If this kernel release is less than
Nov 2 09:45:27 jurassic kernel: three months old please report this to linux-smp@vger.kernel.org
Nov 2 09:45:27 jurassic kernel:
Nov 2 09:45:27 jurassic last message repeated 2 times
Nov 2 09:45:27 jurassic kernel: ..........................
Nov 2 09:45:27 jurassic kernel: Using local APIC timer interrupts.
Nov 2 09:45:27 jurassic kernel: calibrating APIC timer ...
Nov 2 09:45:27 jurassic kernel: ..... CPU clock speed is 2992.4802 MHz.
Nov 2 09:45:27 jurassic kernel: ..... host bus clock speed is 199.4985 MHz.
Nov 2 09:45:27 jurassic kernel: cpu: 0, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: CPU0<T0:1994976,T1:1595968
Nov 2 09:45:27 jurassic kernel: cpu: 1, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: cpu: 2, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: cpu: 3, clocks: 1994985, slice: 398997
Nov 2 09:45:27 jurassic kernel: CPU1<T0:1994976,T1:1196976
Nov 2 09:45:27 jurassic kernel: CPU2<T0:1994976,T1:797984,
Nov 2 09:45:27 jurassic kernel: CPU3<T0:1994976,T1:398976,
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[0] = 2
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[1] = 3
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[2] = 0
Nov 2 09:45:27 jurassic kernel: cpu_sibling_map[3] = 1
Nov 2 09:45:27 jurassic kernel: mapping CPU#0's runqueue to CPU#2's runqueue.
Nov 2 09:45:27 jurassic kernel: mapping CPU#1's runqueue to CPU#3's runqueue.
Nov 2 09:45:27 jurassic kernel: zapping low mappings.
Nov 2 09:45:27 jurassic kernel: Process timing init...done.
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 0
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 1
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 2
Nov 2 09:45:27 jurassic kernel: Starting migration thread for cpu 3
Nov 2 09:45:27 jurassic kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=11
Nov 2 09:45:27 jurassic kernel: PCI: Using configuration type 1
Nov 2 09:45:27 jurassic kernel: PCI: Probing PCI hardware
Nov 2 09:45:27 jurassic kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Nov 2 09:45:27 jurassic kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Nov 2 09:45:27 jurassic kernel: PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I4,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I5,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I6,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B2,I14,P0) -> 38
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B6,I7,P0) -> 48
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B7,I8,P0) -> 49
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P0) -> 20
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P1) -> 21
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I6,P0) -> 23
Nov 2 09:45:27 jurassic kernel: PCI->APIC IRQ transform: (B11,I13,P0) -> 18
Nov 2 09:45:27 jurassic kernel: isapnp: Scanning for PnP cards...
Nov 2 09:45:27 jurassic kernel: isapnp: No Plug & Play device found
Nov 2 09:45:27 jurassic kernel: Linux NET4.0 for Linux 2.4
Nov 2 09:45:27 jurassic kernel: Based upon Swansea University Computer Society NET3.039
Nov 2 09:45:27 jurassic kernel: Initializing RT netlink socket
Nov 2 09:45:27 jurassic kernel: apm: BIOS not found.
Nov 2 09:45:27 jurassic kernel: Total HugeTLB memory allocated, 0
Nov 2 09:45:27 jurassic kernel: Starting kswapd
Nov 2 09:45:27 jurassic kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Nov 2 09:45:27 jurassic kernel: VFS: Disk quotas vdquot_6.5.1
Nov 2 09:45:27 jurassic kernel: aio_setup: num_physpages = 327680
Nov 2 09:45:27 jurassic kernel: aio_setup: sizeof(struct page) = 60
Nov 2 09:45:27 jurassic kernel: Hugetlbfs mounted.
Nov 2 09:45:27 jurassic kernel: pty: 2048 Unix98 ptys configured
Nov 2 09:45:27 jurassic kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 2 09:45:27 jurassic kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Nov 2 09:45:27 jurassic kernel: Real Time Clock Driver v1.10e
Nov 2 09:45:27 jurassic kernel: NET4: Frame Diverter 0.46
Nov 2 09:45:27 jurassic kernel: RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Nov 2 09:45:27 jurassic kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 2 09:45:27 jurassic kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 2 09:45:27 jurassic kernel: ICH5: IDE controller at PCI slot 00:1f.1
Nov 2 09:45:27 jurassic kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Nov 2 09:45:27 jurassic kernel: ICH5: chipset revision 2
Nov 2 09:45:27 jurassic kernel: ICH5: not 100%% native mode: will probe irqs later
Nov 2 09:45:27 jurassic kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 2 09:45:27 jurassic kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Nov 2 09:45:27 jurassic kernel: SiI680: IDE controller at PCI slot 0b:06.0
Nov 2 09:45:27 jurassic kernel: SiI680: chipset revision 2
Nov 2 09:45:27 jurassic kernel: SiI680: BASE CLOCK == 100
Nov 2 09:45:27 jurassic kernel: SiI680: 100%% native mode on irq 23
Nov 2 09:45:27 jurassic kernel: ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Nov 2 09:45:27 jurassic kernel: ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Nov 2 09:45:27 jurassic kernel: hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
Nov 2 09:45:27 jurassic kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 2 09:45:27 jurassic kernel: md: Autodetecting RAID arrays.
Nov 2 09:45:27 jurassic kernel: md: autorun ...
Nov 2 09:45:27 jurassic kernel: md: ... autorun DONE.
Nov 2 09:45:27 jurassic kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 2 09:45:27 jurassic kernel: Initializing Cryptographic API
Nov 2 09:45:27 jurassic kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 2 09:45:27 jurassic kernel: IP: routing cache hash table of 65536 buckets, 512Kbytes
Nov 2 09:45:27 jurassic kernel: TCP: Hash tables configured (established 524288 bind 65536)
Nov 2 09:45:27 jurassic kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 2 09:45:27 jurassic kernel: Initializing IPsec netlink socket
Nov 2 09:45:27 jurassic kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 2 09:45:27 jurassic kernel: RAMDISK: Compressed image found at block 0
Nov 2 09:45:27 jurassic kernel: Freeing initrd memory: 348k freed
Nov 2 09:45:27 jurassic kernel: VFS: Mounted root (ext2 filesystem).
Nov 2 09:45:27 jurassic kernel: SCSI subsystem driver Revision: 1.00
Nov 2 09:45:27 jurassic kernel: megaraid: v2.10.7 (Release Date: Sat Jun 5 02:32:59 EDT 2004)
Nov 2 09:45:27 jurassic irqbalance: irqbalance startup succeeded
Nov 2 09:45:27 jurassic kernel: megaraid: found 0x1028:0x0013:bus 2:slot 14:func 0
Nov 2 09:45:27 jurassic kernel: scsi0:Found MegaRAID controller at 0xf8843000, IRQ:38
Nov 2 09:45:27 jurassic kernel: megaraid: [513O:H418] detected 1 logical drives.
Nov 2 09:45:27 jurassic kernel: megaraid: supports extended CDBs.
Nov 2 09:45:27 jurassic kernel: megaraid: channel[0] is raid.
Nov 2 09:45:27 jurassic kernel: megaraid: channel[1] is raid.
Nov 2 09:45:27 jurassic kernel: scsi0 : LSI Logic MegaRAID 513O 254 commands 16 targs 5 chans 7 luns
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue c7526218, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 0 for logical drives.
Nov 2 09:45:27 jurassic kernel: Vendor: MegaRAID Model: LD 0 RAID5 349G Rev: 513O
Nov 2 09:45:27 jurassic kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue c7526018, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 1 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 2 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 3 for logical drives.
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 4 [P0] for physical devices.
Nov 2 09:45:27 jurassic kernel: Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Nov 2 09:45:27 jurassic kernel: Type: Processor ANSI SCSI revision: 02
Nov 2 09:45:27 jurassic kernel: Starting timer : 0 0
Nov 2 09:45:27 jurassic kernel: blk: queue f65b4e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:45:27 jurassic kernel: scsi0: scanning scsi channel 5 [P1] for physical devices.
Nov 2 09:45:27 jurassic kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 2 09:45:27 jurassic kernel: SCSI device sda: 715571200 512-byte hdwr sectors (366372 MB)
Nov 2 09:45:27 jurassic kernel: Partition check:
Nov 2 09:45:27 jurassic kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Nov 2 09:45:27 jurassic kernel: Red Hat/Adaptec aacraid driver (1.1-4 Dec 15 2003 21:20:04)
Nov 2 09:45:27 jurassic kernel: Journalled Block Device driver loaded
Nov 2 09:45:27 jurassic kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 2 09:45:27 jurassic kernel: EXT3-fs: write access will be enabled during recovery.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3-fs: sd(8,10): orphan cleanup on readonly fs
Nov 2 09:45:27 jurassic kernel: EXT3-fs: sd(8,10): 2 orphan inodes deleted
Nov 2 09:45:27 jurassic kernel: EXT3-fs: recovery complete.
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: Freeing unused kernel memory: 224k freed
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver usbdevfs
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hub
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: $Revision: 1.275 $ time 18:08:43 Oct 3 2003
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: High bandwidth mode enabled
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbce0, IRQ 16
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbcc0, IRQ 19
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbca0, IRQ 18
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: Intel Corp. 82801EB USB2
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: irq 23, pci mem f88a0000
Nov 2 09:45:27 jurassic kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Nov 2 09:45:27 jurassic kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
Nov 2 09:45:27 jurassic kernel: PCI: 00:1d.7 PCI cache line size corrected to 128.
Nov 2 09:45:27 jurassic kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 6 ports detected
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hiddev
Nov 2 09:45:27 jurassic kernel: usb.c: registered new driver hid
Nov 2 09:45:27 jurassic kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Nov 2 09:45:27 jurassic kernel: hid-core.c: USB HID support drivers
Nov 2 09:45:27 jurassic kernel: mice: PS/2 mouse device common for all mice
Nov 2 09:45:27 jurassic kernel: hub.c: connect-debounce failed, port 1 disabled
Nov 2 09:45:27 jurassic kernel: hub.c: new USB device 00:1d.7-3, assigned address 2
Nov 2 09:45:27 jurassic kernel: hub.c: USB hub found
Nov 2 09:45:27 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:45:27 jurassic kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
Nov 2 09:45:27 jurassic kernel: input0: USB HID v1.10 Keyboard [Dell DRAC4] on usb1:2.0
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: interrupt, status 2, frame# 756
Nov 2 09:45:27 jurassic kernel: input1: USB HID v1.10 Mouse [Dell DRAC4] on usb1:2.1
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
Nov 2 09:45:27 jurassic kernel: Adding Swap: 2096440k swap-space (priority -1)
Nov 2 09:45:27 jurassic kernel: Adding Swap: 2096440k swap-space (priority -2)
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f6789c80, burb f541df00
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f676a980, burb f541df00
Nov 2 09:45:27 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f6789c80, burb f541df00
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:45:27 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Nov 2 09:45:27 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:45:27 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:45:27 jurassic kernel: hda: attached ide-cdrom driver.
Nov 2 09:45:27 jurassic kernel: hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 2 09:45:27 jurassic kernel: Uniform CD-ROM driver Revision: 3.12
Nov 2 09:45:27 jurassic kernel: hda: DMA disabled
Nov 2 09:45:27 jurassic kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Nov 2 09:45:27 jurassic kernel: inserting floppy driver for 2.4.21-4.ELsmp
Nov 2 09:45:27 jurassic kernel: FDC 0 is a National Semiconductor PC87306
Nov 2 09:45:27 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:45:27 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:45:27 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:45:27 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:45:27 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:45:27 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:45:27 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:45:27 jurassic portmap: portmap startup succeeded
Nov 2 09:45:27 jurassic rpc.statd[1535]: Version 1.0.5 Starting
Nov 2 09:45:31 jurassic kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
Nov 2 09:46:24 jurassic rpc.statd[1535]: gethostbyname error for jurassic.eurocoptersea.com
Nov 2 09:46:24 jurassic nfslock: rpc.statd startup succeeded
Nov 2 09:46:24 jurassic keytable:
Nov 2 09:46:24 jurassic keytable: Loading system font:
Nov 2 09:46:24 jurassic keytable:
Nov 2 09:46:24 jurassic rc: Starting keytable: succeeded
Nov 2 09:46:24 jurassic racsvc: S20racsvc start succeeded
Nov 2 09:46:24 jurassic random: Initializing random number generator: succeeded
Nov 2 09:46:24 jurassic rc: Starting pcmcia: succeeded
Nov 2 09:46:24 jurassic netfs: Mounting other filesystems: succeeded
Nov 2 09:46:24 jurassic autofs: automount startup succeeded
Nov 2 09:46:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:46:26 jurassic insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
Nov 2 09:46:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:46:26 jurassic kernel: lp: driver loaded but no devices found
Nov 2 09:46:26 jurassic modprobe: modprobe: Can't locate module char-major-188
Nov 2 09:46:26 jurassic last message repeated 15 times
Nov 2 09:46:26 jurassic cups: cupsd startup succeeded
Nov 2 09:46:26 jurassic named[1728]: starting BIND 9.2.2 -u named
Nov 2 09:46:26 jurassic named[1728]: using 4 CPUs
Nov 2 09:46:26 jurassic named: named startup succeeded
Nov 2 09:46:26 jurassic named[1728]: loading configuration from '/etc/named.conf'
Nov 2 09:46:26 jurassic named[1728]: no IPv6 interfaces found
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0, 172.16.1.11#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:1, 172.16.1.12#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:2, 172.16.1.13#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:3, 172.16.1.14#53
Nov 2 09:46:26 jurassic named[1728]: listening on IPv4 interface eth0:4, 172.16.1.15#53
Nov 2 09:46:26 jurassic named[1728]: command channel listening on 127.0.0.1#953
Nov 2 09:46:26 jurassic sshd: succeeded
Nov 2 09:46:27 jurassic xinetd: xinetd startup succeeded
Nov 2 09:46:27 jurassic vsftpd: true startup succeeded
Nov 2 09:46:28 jurassic sendmail: sendmail startup succeeded
Nov 2 09:46:28 jurassic sendmail: sm-client startup succeeded
Nov 2 09:46:28 jurassic xinetd[1758]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Nov 2 09:46:28 jurassic xinetd[1758]: Started working: 1 available service
Nov 2 09:46:28 jurassic gpm: gpm startup succeeded
Nov 2 09:46:30 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:46:30 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:46:30 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:46:30 jurassic httpd:
Nov 2 09:46:30 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:46:30 jurassic httpd: Enter pass phrase:
Nov 2 09:46:30 jurassic sshd(pam_unix)[1829]: session opened for user huy by (uid=502)
Nov 2 09:46:33 jurassic sshd(pam_unix)[1839]: session opened for user tancs by (uid=500)
Nov 2 09:47:01 jurassic sshd(pam_unix)[1847]: session opened for user root by (uid=0)
Nov 2 09:47:40 jurassic httpd: Apache:mod_ssl:Error: Private key not found.
Nov 2 09:47:40 jurassic httpd: **Stopped
Nov 2 09:47:40 jurassic httpd: httpd startup failed
Nov 2 09:47:41 jurassic httpd: httpd shutdown succeeded
Nov 2 09:47:41 jurassic crond: crond startup succeeded
Nov 2 09:47:42 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:47:42 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:47:42 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:47:42 jurassic httpd:
Nov 2 09:47:42 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:47:42 jurassic httpd: Enter pass phrase:
Nov 2 09:47:42 jurassic xfs: xfs startup succeeded
Nov 2 09:47:42 jurassic atd: atd startup succeeded
Nov 2 09:47:42 jurassic xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/c
Nov 2 09:47:42 jurassic instsvcdrv: dcdbas device driver loaded
Nov 2 09:47:43 jurassic instsvcdrv: dcdipm device driver loaded
Nov 2 09:47:45 jurassic omsad: omsad32 startup succeeded
Nov 2 09:47:45 jurassic httpd:
Nov 2 09:47:45 jurassic httpd: OK: Pass Phrase Dialog successful.
Nov 2 09:47:45 jurassic snmpd: snmpd startup succeeded
Nov 2 09:47:45 jurassic httpd: httpd startup succeeded
Nov 2 09:47:45 jurassic snmpd[2146]: NET-SNMP version 5.0.8
Nov 2 09:47:53 jurassic dataeng: dcstor32d startup succeeded
Nov 2 09:47:54 jurassic Server Administrator: Instrumentation Service EventID: 1000 Server Administrator starting
Nov 2 09:47:54 jurassic Server Administrator: Instrumentation Service EventID: 1001 Server Administrator startup complete
Nov 2 09:47:54 jurassic dataeng: dcevt32d startup succeeded
Nov 2 09:47:54 jurassic dataeng: dcsnmp32d startup succeeded
Nov 2 09:47:55 jurassic omawsd: omaws32 startup succeeded
Nov 2 09:47:55 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:47:57 jurassic snmpd[2146]: [smux_accept] accepted fd 11 from 127.0.0.1:32771
Nov 2 09:47:57 jurassic snmpd[2146]: accepted smux peer: oid SNMPv2-SMI::enterprises.67
Nov 2 09:48:02 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:02 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:02 jurassic kernel: Attached scsi generic sg1 at scsi0, channel 4, id 6, lun 0, type 3
Nov 2 09:48:16 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:22 jurassic modprobe: modprobe: Can't locate module char-major-10-220
Nov 2 09:48:26 jurassic Server Administrator: Storage Service EventID: 2164 See readme.txt for a list of validated controller driver versions.
Nov 2 09:48:26 jurassic Server Administrator: Storage Service EventID: 2131 The current firmware version 513O is older than the required firmware version 521Q for a controller of model PERC 4e/Di: Controller 0 (PERC 4e/Di)
Nov 2 09:48:27 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:28 jurassic snmpd[2146]: Got trap from peer on fd 11
Nov 2 09:48:41 jurassic sendmail: sendmail shutdown succeeded
Nov 2 09:48:41 jurassic sendmail: sm-client shutdown succeeded
Nov 2 09:48:42 jurassic sendmail: sendmail startup succeeded
Nov 2 09:48:42 jurassic sendmail: sm-client startup succeeded
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-22
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-22
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-33
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-33
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-34
Nov 2 09:48:42 jurassic modprobe: modprobe: Can't locate module block-major-34
Nov 2 09:48:44 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:44 jurassic last message repeated 9 times
Nov 2 09:48:44 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 7 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 9 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 9 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-156
Nov 2 09:48:45 jurassic last message repeated 3 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-154
Nov 2 09:48:45 jurassic last message repeated 18 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-174
Nov 2 09:48:45 jurassic last message repeated 15 times
Nov 2 09:48:45 jurassic modprobe: modprobe: Can't locate module char-major-204
Nov 2 09:48:45 jurassic last message repeated 6 times
Nov 2 09:49:22 jurassic sshd(pam_unix)[2921]: session opened for user tancs by (uid=500)
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2968 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2968 (lsusb) did not claim interface 1 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2978 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2978 (lsusb) did not claim interface 1 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2982 (lsusb) did not claim interface 0 before use
Nov 2 09:49:25 jurassic kernel: usbdevfs: process 2982 (lsusb) did not claim interface 1 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2986 (lsusb) did not claim interface 0 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2986 (lsusb) did not claim interface 1 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2990 (lsusb) did not claim interface 0 before use
Nov 2 09:49:26 jurassic kernel: usbdevfs: process 2990 (lsusb) did not claim interface 1 before use
Nov 2 09:56:47 jurassic syslogd 1.4.1: restart.
Nov 2 09:56:47 jurassic syslog: syslogd startup succeeded
Nov 2 09:56:47 jurassic kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 2 09:56:47 jurassic kernel: Linux version 2.4.21-4.ELsmp (bhcompile@daffy.perf.redh
Nov 2 09:56:47 jurassic kernel: BIOS-provided physical RAM map:
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000bffc0000 - 00000000bffcfc00 (ACPI data)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000bffcfc00 - 00000000bffff000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 2 09:56:47 jurassic kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Nov 2 09:56:47 jurassic kernel: 4224MB HIGHMEM available.
Nov 2 09:56:47 jurassic kernel: 896MB LOWMEM available.
Nov 2 09:56:47 jurassic syslog: klogd startup succeeded
Nov 2 09:56:47 jurassic kernel: found SMP MP-table at 000fe710
Nov 2 09:56:47 jurassic kernel: hm, page 000fe000 reserved twice.
Nov 2 09:56:47 jurassic kernel: hm, page 000ff000 reserved twice.
Nov 2 09:56:47 jurassic kernel: hm, page 000f0000 reserved twice.
Nov 2 09:56:47 jurassic kernel: On node 0 totalpages: 1310720
Nov 2 09:56:47 jurassic kernel: zone(0): 4096 pages.
Nov 2 09:56:47 jurassic kernel: zone(1): 225280 pages.
Nov 2 09:56:47 jurassic kernel: zone(2): 1081344 pages.
Nov 2 09:56:47 jurassic kernel: ACPI: Searched entire block, no RSDP was found.
Nov 2 09:56:47 jurassic kernel: ACPI: RSDP located at physical address c00fd5b0
Nov 2 09:56:47 jurassic kernel: RSD PTR v0 [DELL ]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd5c4, 0x68): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: RSDT v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd620, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd620, 0x74): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: FACP v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: APIC v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd694, 0xe0): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0002] id[0x6] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0003] id[0x1] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0004] id[0x7] enabled[1])
Nov 2 09:56:47 jurassic kernel: CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:4] APIC version 20
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0005] id[0x2] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 4 (0x0200) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0006] id[0x4] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 5 (0x0400) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0007] id[0x3] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 6 (0x0300) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC (acpi_id[0x0008] id[0x5] enabled[0])
Nov 2 09:56:47 jurassic kernel: CPU 7 (0x0500) disabled
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0004] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0005] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0006] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0007] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: LAPIC_NMI (acpi_id[0x0008] polarity[0x1] trigger[0x1] lint[0x1])
Nov 2 09:56:47 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 2 09:56:47 jurassic kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0x9] address[0xfec80000] global_irq_base[0x20])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0xa] address[0xfec83000] global_irq_base[0x40])
Nov 2 09:56:47 jurassic kernel: IOAPIC (id[0xb] address[0xfec84000] global_irq_base[0x60])
Nov 2 09:56:47 jurassic kernel: 8 CPUs total
Nov 2 09:56:47 jurassic kernel: Local APIC address fee00000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd774, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd774, 0x50): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: SPCR v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7c4, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7c4, 0x38): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: HPET v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: ACPI: Unsupported table HPET
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7fc, 0x24): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: __va_range(0xfd7fc, 0x3c): idx=33 mapped at fffdd000
Nov 2 09:56:47 jurassic kernel: ACPI table found: MCFG v1 [DELL PE BKC 0.1]
Nov 2 09:56:47 jurassic kernel: ACPI: Unsupported table MCFG
Nov 2 09:56:47 jurassic kernel: Enabling the CPU's according to the ACPI table
Nov 2 09:56:47 jurassic kernel: Intel MultiProcessor Specification v1.4
Nov 2 09:56:47 jurassic kernel: Virtual Wire compatibility mode.
Nov 2 09:56:47 jurassic kernel: OEM ID: DELL Product ID: PE 016D APIC at: 0xFEE00000
Nov 2 09:56:47 jurassic kernel: I/O APIC #8 Version 32 at 0xFEC00000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #9 Version 32 at 0xFEC80000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #10 Version 32 at 0xFEC83000.
Nov 2 09:56:47 jurassic kernel: I/O APIC #11 Version 32 at 0xFEC84000.
Nov 2 09:56:47 jurassic kernel: Processors: 4
Nov 2 09:56:47 jurassic kernel: xAPIC support is present
Nov 2 09:56:47 jurassic kernel: Enabling APIC mode: Flat.^IUsing 4 I/O APICs
Nov 2 09:56:47 jurassic kernel: Kernel command line: ro root=LABEL=/ apic
Nov 2 09:56:47 jurassic kernel: Initializing CPU#0
Nov 2 09:56:47 jurassic kernel: Detected 2992.626 MHz processor.
Nov 2 09:56:47 jurassic kernel: Console: colour VGA+ 80x25
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: Memory: 4107480k/5242880k available (1683k kernel code, 81960k reserved, 1318k data, 224k init, 3276544k highmem)
Nov 2 09:56:47 jurassic kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: Inode cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 2 09:56:47 jurassic kernel: Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes)
Nov 2 09:56:47 jurassic kernel: Page-cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check architecture supported.
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:56:47 jurassic kernel: Enabling fast FPU save and restore... done.
Nov 2 09:56:47 jurassic kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 2 09:56:47 jurassic kernel: Checking 'hlt' instruction... OK.
Nov 2 09:56:47 jurassic kernel: POSIX conformance testing by UNIFIX
Nov 2 09:56:47 jurassic kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 2 09:56:47 jurassic kernel: mtrr: detected mtrr type: Intel
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#0.
Nov 2 09:56:47 jurassic kernel: CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: per-CPU timeslice cutoff: 2925.83 usecs.
Nov 2 09:56:47 jurassic kernel: task migration cache decay timeout: 10 msecs.
Nov 2 09:56:47 jurassic kernel: enabled ExtINT on CPU#0
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Booting processor 1/1 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#1
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#1
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: ACPI tables and CPU MSR values mismatch about cpu number
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#1.
Nov 2 09:56:47 jurassic kernel: CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Booting processor 2/6 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#2
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#2
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 0
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#2.
Nov 2 09:56:47 jurassic kernel: CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Booting processor 3/7 eip 2000
Nov 2 09:56:47 jurassic kernel: Initializing CPU#3
Nov 2 09:56:47 jurassic kernel: masked ExtINT on CPU#3
Nov 2 09:56:47 jurassic kernel: ESR value before enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: ESR value after enabling vector: 00000000
Nov 2 09:56:47 jurassic kernel: Calibrating delay loop... 5976.88 BogoMIPS
Nov 2 09:56:47 jurassic kernel: CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Nov 2 09:56:47 jurassic kernel: CPU: Physical Processor ID: 3
Nov 2 09:56:47 jurassic kernel: Intel machine check reporting enabled on CPU#3.
Nov 2 09:56:47 jurassic kernel: CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Nov 2 09:56:47 jurassic kernel: Total of 4 processors activated (23907.53 BogoMIPS).
Nov 2 09:56:47 jurassic kernel: ENABLING IO-APIC IRQs
Nov 2 09:56:47 jurassic kernel: Setting 8 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 9 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 9 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 10 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 10 ... ok.
Nov 2 09:56:47 jurassic kernel: Setting 11 in the phys_id_present_map
Nov 2 09:56:47 jurassic kernel: ...changing IO-APIC physical APIC ID to 11 ... ok.
Nov 2 09:56:47 jurassic kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 2 09:56:47 jurassic kernel: testing the IO APIC......................
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic kernel: An unexpected IO-APIC was found. If this kernel release is less than
Nov 2 09:56:47 jurassic kernel: three months old please report this to linux-smp@vger.kernel.org
Nov 2 09:56:47 jurassic kernel:
Nov 2 09:56:47 jurassic last message repeated 2 times
Nov 2 09:56:47 jurassic kernel: ..........................
Nov 2 09:56:47 jurassic kernel: Using local APIC timer interrupts.
Nov 2 09:56:47 jurassic kernel: calibrating APIC timer ...
Nov 2 09:56:47 jurassic kernel: ..... CPU clock speed is 2992.6414 MHz.
Nov 2 09:56:47 jurassic kernel: ..... host bus clock speed is 199.5092 MHz.
Nov 2 09:56:47 jurassic kernel: cpu: 0, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: CPU0<T0:1995088,T1:1596064
Nov 2 09:56:47 jurassic kernel: cpu: 1, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: cpu: 3, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: cpu: 2, clocks: 1995092, slice: 399018
Nov 2 09:56:47 jurassic kernel: CPU1<T0:1995088,T1:1197040
Nov 2 09:56:47 jurassic kernel: CPU2<T0:1995088,T1:798032,
Nov 2 09:56:47 jurassic kernel: CPU3<T0:1995088,T1:399008,
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[0] = 2
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[1] = 3
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[2] = 0
Nov 2 09:56:47 jurassic kernel: cpu_sibling_map[3] = 1
Nov 2 09:56:47 jurassic kernel: mapping CPU#0's runqueue to CPU#2's runqueue.
Nov 2 09:56:47 jurassic kernel: mapping CPU#1's runqueue to CPU#3's runqueue.
Nov 2 09:56:47 jurassic kernel: zapping low mappings.
Nov 2 09:56:47 jurassic kernel: Process timing init...done.
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 0
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 1
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 2
Nov 2 09:56:47 jurassic kernel: Starting migration thread for cpu 3
Nov 2 09:56:47 jurassic kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=11
Nov 2 09:56:47 jurassic kernel: PCI: Using configuration type 1
Nov 2 09:56:47 jurassic kernel: PCI: Probing PCI hardware
Nov 2 09:56:47 jurassic kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Nov 2 09:56:47 jurassic kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Nov 2 09:56:47 jurassic kernel: PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I4,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I5,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I6,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B2,I14,P0) -> 38
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B6,I7,P0) -> 48
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B7,I8,P0) -> 49
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P0) -> 20
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I5,P1) -> 21
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I6,P0) -> 23
Nov 2 09:56:47 jurassic kernel: PCI->APIC IRQ transform: (B11,I13,P0) -> 18
Nov 2 09:56:47 jurassic kernel: isapnp: Scanning for PnP cards...
Nov 2 09:56:47 jurassic kernel: isapnp: No Plug & Play device found
Nov 2 09:56:47 jurassic kernel: Linux NET4.0 for Linux 2.4
Nov 2 09:56:47 jurassic kernel: Based upon Swansea University Computer Society NET3.039
Nov 2 09:56:47 jurassic kernel: Initializing RT netlink socket
Nov 2 09:56:47 jurassic kernel: apm: BIOS not found.
Nov 2 09:56:47 jurassic kernel: Total HugeTLB memory allocated, 0
Nov 2 09:56:47 jurassic kernel: Starting kswapd
Nov 2 09:56:47 jurassic kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Nov 2 09:56:47 jurassic kernel: VFS: Disk quotas vdquot_6.5.1
Nov 2 09:56:47 jurassic kernel: aio_setup: num_physpages = 327680
Nov 2 09:56:47 jurassic kernel: aio_setup: sizeof(struct page) = 60
Nov 2 09:56:47 jurassic kernel: Hugetlbfs mounted.
Nov 2 09:56:47 jurassic kernel: pty: 2048 Unix98 ptys configured
Nov 2 09:56:47 jurassic kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 2 09:56:47 jurassic irqbalance: irqbalance startup succeeded
Nov 2 09:56:47 jurassic kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Nov 2 09:56:47 jurassic kernel: Real Time Clock Driver v1.10e
Nov 2 09:56:47 jurassic kernel: NET4: Frame Diverter 0.46
Nov 2 09:56:47 jurassic kernel: RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Nov 2 09:56:47 jurassic kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 2 09:56:47 jurassic kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 2 09:56:47 jurassic kernel: ICH5: IDE controller at PCI slot 00:1f.1
Nov 2 09:56:47 jurassic kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Nov 2 09:56:47 jurassic kernel: ICH5: chipset revision 2
Nov 2 09:56:47 jurassic kernel: ICH5: not 100%% native mode: will probe irqs later
Nov 2 09:56:47 jurassic kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 2 09:56:47 jurassic kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Nov 2 09:56:47 jurassic kernel: SiI680: IDE controller at PCI slot 0b:06.0
Nov 2 09:56:47 jurassic kernel: SiI680: chipset revision 2
Nov 2 09:56:47 jurassic kernel: SiI680: BASE CLOCK == 100
Nov 2 09:56:47 jurassic kernel: SiI680: 100%% native mode on irq 23
Nov 2 09:56:47 jurassic kernel: ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Nov 2 09:56:47 jurassic kernel: ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Nov 2 09:56:47 jurassic kernel: hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
Nov 2 09:56:47 jurassic kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 2 09:56:47 jurassic kernel: md: Autodetecting RAID arrays.
Nov 2 09:56:47 jurassic kernel: md: autorun ...
Nov 2 09:56:47 jurassic kernel: md: ... autorun DONE.
Nov 2 09:56:47 jurassic kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 2 09:56:47 jurassic kernel: Initializing Cryptographic API
Nov 2 09:56:47 jurassic kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 2 09:56:47 jurassic kernel: IP: routing cache hash table of 65536 buckets, 512Kbytes
Nov 2 09:56:47 jurassic kernel: TCP: Hash tables configured (established 524288 bind 65536)
Nov 2 09:56:47 jurassic kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 2 09:56:47 jurassic kernel: Initializing IPsec netlink socket
Nov 2 09:56:47 jurassic kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 2 09:56:47 jurassic kernel: RAMDISK: Compressed image found at block 0
Nov 2 09:56:47 jurassic kernel: Freeing initrd memory: 348k freed
Nov 2 09:56:47 jurassic kernel: VFS: Mounted root (ext2 filesystem).
Nov 2 09:56:47 jurassic kernel: SCSI subsystem driver Revision: 1.00
Nov 2 09:56:47 jurassic kernel: megaraid: v2.10.7 (Release Date: Sat Jun 5 02:32:59 EDT 2004)
Nov 2 09:56:47 jurassic kernel: megaraid: found 0x1028:0x0013:bus 2:slot 14:func 0
Nov 2 09:56:47 jurassic kernel: scsi0:Found MegaRAID controller at 0xf8843000, IRQ:38
Nov 2 09:56:47 jurassic kernel: megaraid: [513O:H418] detected 1 logical drives.
Nov 2 09:56:47 jurassic kernel: megaraid: supports extended CDBs.
Nov 2 09:56:47 jurassic kernel: megaraid: channel[0] is raid.
Nov 2 09:56:47 jurassic kernel: megaraid: channel[1] is raid.
Nov 2 09:56:47 jurassic kernel: scsi0 : LSI Logic MegaRAID 513O 254 commands 16 targs 5 chans 7 luns
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 0 for logical drives.
Nov 2 09:56:47 jurassic kernel: Vendor: MegaRAID Model: LD 0 RAID5 349G Rev: 513O
Nov 2 09:56:47 jurassic kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6c18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 1 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 2 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 3 for logical drives.
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 4 [P0] for physical devices.
Nov 2 09:56:47 jurassic kernel: Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Nov 2 09:56:47 jurassic kernel: Type: Processor ANSI SCSI revision: 02
Nov 2 09:56:47 jurassic kernel: Starting timer : 0 0
Nov 2 09:56:47 jurassic kernel: blk: queue f65a6a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Nov 2 09:56:47 jurassic kernel: scsi0: scanning scsi channel 5 [P1] for physical devices.
Nov 2 09:56:47 jurassic kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 2 09:56:47 jurassic kernel: SCSI device sda: 715571200 512-byte hdwr sectors (366372 MB)
Nov 2 09:56:47 jurassic kernel: Partition check:
Nov 2 09:56:47 jurassic kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Nov 2 09:56:47 jurassic kernel: Red Hat/Adaptec aacraid driver (1.1-4 Dec 15 2003 21:20:04)
Nov 2 09:56:47 jurassic kernel: Journalled Block Device driver loaded
Nov 2 09:56:47 jurassic kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 2 09:56:47 jurassic kernel: EXT3-fs: write access will be enabled during recovery.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3-fs: sd(8,10): orphan cleanup on readonly fs
Nov 2 09:56:47 jurassic kernel: EXT3-fs: sd(8,10): 2 orphan inodes deleted
Nov 2 09:56:47 jurassic kernel: EXT3-fs: recovery complete.
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: Freeing unused kernel memory: 224k freed
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver usbdevfs
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hub
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: $Revision: 1.275 $ time 18:08:43 Oct 3 2003
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: High bandwidth mode enabled
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbce0, IRQ 16
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbcc0, IRQ 19
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: USB UHCI at I/O 0xbca0, IRQ 18
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: Detected 2 ports
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: Intel Corp. 82801EB USB2
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: irq 23, pci mem f88a0000
Nov 2 09:56:47 jurassic kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Nov 2 09:56:47 jurassic kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
Nov 2 09:56:47 jurassic kernel: PCI: 00:1d.7 PCI cache line size corrected to 128.
Nov 2 09:56:47 jurassic kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 6 ports detected
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hiddev
Nov 2 09:56:47 jurassic kernel: usb.c: registered new driver hid
Nov 2 09:56:47 jurassic kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Nov 2 09:56:47 jurassic kernel: hid-core.c: USB HID support drivers
Nov 2 09:56:47 jurassic kernel: mice: PS/2 mouse device common for all mice
Nov 2 09:56:47 jurassic kernel: hub.c: connect-debounce failed, port 1 disabled
Nov 2 09:56:47 jurassic kernel: hub.c: new USB device 00:1d.7-3, assigned address 2
Nov 2 09:56:47 jurassic kernel: hub.c: USB hub found
Nov 2 09:56:47 jurassic kernel: hub.c: 2 ports detected
Nov 2 09:56:47 jurassic kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
Nov 2 09:56:47 jurassic kernel: input0: USB HID v1.10 Keyboard [Dell DRAC4] on usb1:2.0
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: interrupt, status 2, frame# 741
Nov 2 09:56:47 jurassic kernel: input1: USB HID v1.10 Mouse [Dell DRAC4] on usb1:2.1
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
Nov 2 09:56:47 jurassic kernel: Adding Swap: 2096440k swap-space (priority -1)
Nov 2 09:56:47 jurassic kernel: Adding Swap: 2096440k swap-space (priority -2)
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c74ce480, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c74ce480, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb f5e80b80, burb f5eb2600
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: kjournald starting. Commit interval 5 seconds
Nov 2 09:56:47 jurassic kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Nov 2 09:56:47 jurassic kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 2 09:56:47 jurassic kernel: ide-floppy driver 0.99.newide
Nov 2 09:56:47 jurassic kernel: hda: attached ide-cdrom driver.
Nov 2 09:56:47 jurassic kernel: hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Nov 2 09:56:47 jurassic kernel: Uniform CD-ROM driver Revision: 3.12
Nov 2 09:56:47 jurassic kernel: hda: DMA disabled
Nov 2 09:56:47 jurassic kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Nov 2 09:56:47 jurassic kernel: inserting floppy driver for 2.4.21-4.ELsmp
Nov 2 09:56:47 jurassic kernel: FDC 0 is a National Semiconductor PC87306
Nov 2 09:56:47 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:56:47 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:56:47 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic portmap: portmap startup succeeded
Nov 2 09:56:47 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: Intel(R) PRO/1000 Network Driver - version 5.2.17.3
Nov 2 09:56:47 jurassic kernel: Copyright (c) 1999-2003 Intel Corporation.
Nov 2 09:56:47 jurassic kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: eth1: Intel(R) PRO/1000 Network Connection
Nov 2 09:56:47 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:56:47 jurassic kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 2 09:56:47 jurassic rpc.statd[1532]: Version 1.0.5 Starting
Nov 2 09:56:51 jurassic kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
Nov 2 09:57:24 jurassic rpc.statd[1532]: gethostbyname error for jurassic.eurocoptersea.com
Nov 2 09:57:24 jurassic nfslock: rpc.statd startup succeeded
Nov 2 09:57:24 jurassic keytable: Loading keymap:
Nov 2 09:57:24 jurassic keytable:
Nov 2 09:57:24 jurassic keytable: Loading system font:
Nov 2 09:57:24 jurassic keytable:
Nov 2 09:57:24 jurassic rc: Starting keytable: succeeded
Nov 2 09:57:24 jurassic racsvc: S20racsvc start succeeded
Nov 2 09:57:24 jurassic random: Initializing random number generator: succeeded
Nov 2 09:57:24 jurassic rc: Starting pcmcia: succeeded
Nov 2 09:57:24 jurassic netfs: Mounting other filesystems: succeeded
Nov 2 09:57:24 jurassic autofs: automount startup succeeded
Nov 2 09:57:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:57:26 jurassic insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
Nov 2 09:57:26 jurassic insmod: /lib/modules/2.4.21-4.ELsm
Nov 2 09:57:26 jurassic kernel: lp: driver loaded but no devices found
Nov 2 09:57:26 jurassic modprobe: modprobe: Can't locate module char-major-188
Nov 2 09:57:26 jurassic last message repeated 15 times
Nov 2 09:57:26 jurassic cups: cupsd startup succeeded
Nov 2 09:57:26 jurassic named[1725]: starting BIND 9.2.2 -u named
Nov 2 09:57:26 jurassic named[1725]: using 4 CPUs
Nov 2 09:57:26 jurassic named: named startup succeeded
Nov 2 09:57:26 jurassic named[1725]: loading configuration from '/etc/named.conf'
Nov 2 09:57:26 jurassic named[1725]: no IPv6 interfaces found
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0, 172.16.1.11#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:1, 172.16.1.12#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:2, 172.16.1.13#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:3, 172.16.1.14#53
Nov 2 09:57:26 jurassic named[1725]: listening on IPv4 interface eth0:4, 172.16.1.15#53
Nov 2 09:57:26 jurassic named[1725]: command channel listening on 127.0.0.1#953
Nov 2 09:57:26 jurassic sshd: succeeded
Nov 2 09:57:26 jurassic xinetd: xinetd startup succeeded
Nov 2 09:57:27 jurassic vsftpd: true startup succeeded
Nov 2 09:57:27 jurassic sendmail: sendmail startup succeeded
Nov 2 09:57:27 jurassic sendmail: sm-client startup succeeded
Nov 2 09:57:27 jurassic gpm: gpm startup succeeded
Nov 2 09:57:28 jurassic xinetd[1755]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Nov 2 09:57:28 jurassic xinetd[1755]: Started working: 1 available service
Nov 2 09:57:30 jurassic httpd: Apache/2.0.46 mod_ssl/2.0.46 (Pass Phrase Dialog)
Nov 2 09:57:30 jurassic httpd: Some of your private key files are encrypted for security reasons.
Nov 2 09:57:30 jurassic httpd: In order to read them you have to provide the pass phrases.
Nov 2 09:57:30 jurassic httpd:
Nov 2 09:57:30 jurassic httpd: Server www.eurocoptersea.com:443 (RSA)
Nov 2 09:57:30 jurassic httpd: Enter pass phrase:
Nov 2 09:57:31 jurassic sshd(pam_unix)[1824]: session opened for user tancs by (uid=500)
Nov 2 09:57:35 jurassic sshd(pam_unix)[1834]: session opened for user huy by (uid=502)
Nov 2 09:57:39 jurassic sshd(pam_unix)[1842]: session opened for user root by (uid=0)
ASKER
Please help guide and advice me..
Thanks.
Thanks.
I do not see any reference the system registered that dealt with the failure.
use memtest to test the memory as that is often the only thing that can trigger a restart event without recording the event.
What is the system?
Single/dual power supply?
A drop on the 3.3v (memory) below 3.0 will trigger a reboot
use memtest to test the memory as that is often the only thing that can trigger a restart event without recording the event.
What is the system?
Single/dual power supply?
A drop on the 3.3v (memory) below 3.0 will trigger a reboot
ASKER
Hi arnold:
Thank you and noted.
Dell power edge. dual power supply.
Thank you and noted.
Dell power edge. dual power supply.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Dear All:
I install the Dell Open manager and run the test.
From the report, it show nothing wrong. Power, memory, hardware, fan and etc.
Any ideas what to check? the server restart again.
Many thanks.
I install the Dell Open manager and run the test.
From the report, it show nothing wrong. Power, memory, hardware, fan and etc.
Any ideas what to check? the server restart again.
Many thanks.
Do you have two or a single power supply?
Did you enable/configure the crash dump?
Did you enable/configure the crash dump?
ASKER
Dear arnold:
Two power supply. I was not able to generate crash report.
Do you need the DSET report?
Thank you.
Two power supply. I was not able to generate crash report.
Do you need the DSET report?
Thank you.
It's not a question of what I need. At this point, do you have a pattern developing:
i.e. when the reboot occurs time wise?
What is your setting within the dell openmanage alert management platform events
Do you have any condition there configured to reboot the system on failure?
i.e. when the reboot occurs time wise?
What is your setting within the dell openmanage alert management platform events
Do you have any condition there configured to reboot the system on failure?
ASKER
Dear arnold:
i.e. when the reboot occurs time wise?
What is your setting within the dell openmanage alert management platform events
=>Not, i do not set any configuration. I just running the report with default setting
Do you have any condition there configured to reboot the system on failure?
=>Not. Nothing configuration set.
Many thanks.
i.e. when the reboot occurs time wise?
What is your setting within the dell openmanage alert management platform events
=>Not, i do not set any configuration. I just running the report with default setting
Do you have any condition there configured to reboot the system on failure?
=>Not. Nothing configuration set.
Many thanks.
At this point, the information you posted suggests that either the power cuts off or something else is going on. Often when the system resets (kernel panic, etc.) it is recorded in the bootup messages.
You could setup data collection scripts to get top -n 1, vmstat, iostat, etc. to collect data every five minutes in an attempt to see whether there is something common to events prior to the reboot.
You could setup data collection scripts to get top -n 1, vmstat, iostat, etc. to collect data every five minutes in an attempt to see whether there is something common to events prior to the reboot.
You can certainly check
cat /var/spool/cron*/*
And check if there is a cron job to do this