BillLap12
asked on
Xerox 8560 phaser
How to configure scan tp pc on wondows domain using xerox 8560 phaser
You need to use the Xerox Scan Utility. If the manual linked by Moomin83 does not give you the answers you want, please tell us what the problem is. Do you get any error messages? Are you scanning by using the Scan button on the Phaser? Can you select the folder?
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
Glad you got the XPs working. Win7 drivers would not be on the printer CD as the printer was released quite a while ago and Xerox rarely update the CD. However, Win7 drivers can be found here.
ASKER
I have the win 7 drivers, my question is how does this work when scanning to pc. The 7 drivers have no scan utility. At least not as far as i can see.
The link I gave has network scanner drivers. Here's the 32-bit one:
http://www.support.xerox.com/support/phaser-8560mfp/file-download/enus.html?operatingSystem=win7&fileLanguage=en&contentId=117139&from=downloads&viewArchived=false
http://www.support.xerox.com/support/phaser-8560mfp/file-download/enus.html?operatingSystem=win7&fileLanguage=en&contentId=117139&from=downloads&viewArchived=false
ASKER
The manual for the Phaser was incomplete at best for addressing the domain scan issue. My solution wokred and worked well anyone else trying to do the same would wise to read it.
Attached is a manual to the device in question.
HTH
user-guide-en.pdf