Link to home
Start Free TrialLog in
Avatar of InSearchOf
InSearchOfFlag for United States of America

asked on

Protocol drps and Interface resets

I was having some problems with an 1801 cisco router. I replaced it with an 1841 router. I configured it the same. I have internet access now but when I look at the interfaces, I see "Unknown Protocols Drops" increasing on my Fa0/1 interface along with some interface resets. I attached the old and new configs as well as a screenshot of the show interface. Is my config off somewhere? The ios on the old router was ADVIPSERVICESK9-M. The new one has ADVSECURITYK9-M
ASKER CERTIFIED SOLUTION
Avatar of erik_nodland
erik_nodland
Flag of United Kingdom of Great Britain and Northern Ireland image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of InSearchOf

ASKER

Which I do. Let me turn it on. But my culprit seemd to be DTP. Once I set i to nonnegoiate on the switchport it was connected to the errors stopped incrementing.