I have a windows 2008 Std. server installed on a Dell PE 2950 server running exchange 2010 server. i have a total of two arrays on it, both mirrors. My first array contains the OS, the second contains exchange databases.
The first array consists of 2x 146Gb SAs 10k disks.So here where i need your help.
I would like to replace the first array disks with 2x146Gb 15k drives and this is what i'm planning to do; through Dell system manager.
3.remove it and replace it with the new 15K disk
here the system should rebuild the array. wait 24 hours and repeat the same procedure on Disk 0
Is this a good plan?