• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 813
  • Last Modified:

Procurve L3 Switch (3500yl) Setting up Vlan w/ clients and servers

I have a test bench setup in which I am attemting to create 2 vlans (3500yl HP).

I'm using DHCP relay w/ MS DHCP server.

Typical config I've tried:

ip routing
vlan 20
untagged 5,6
ip address 192.168.20.1/24
ip helper-address 192.168.10.10
vlan 10
untagged 17-20
ip address 192.168.10.1/24 (restricted 192.168.10.1-25)
ip helper-address 192.168.10.10
write mem

So.....
I can reach the web server on the DHCP server x.x.10.10

But I want to put other servers (file server) on the Vlan 10 lan. No joy!

I can't seem to see the web servers or files on any other server on the vlan 10 lan.

What am I missing?

Thanx-----
0
t-recs
Asked:
t-recs
  • 6
  • 5
1 Solution
 
Don JohnstonInstructorCommented:
Do the VLAN 20 hosts have their default-gateway set to 192.168.20.1?
0
 
t-recsAuthor Commented:
The DHCP sets the respective gateways - thus Vlan 20 = 192.168.20.1

Is this right?

(thanks for the prompt reply)
0
 
Don JohnstonInstructorCommented:
Yep.

What ports are the VLAN 20 hosts connected to and what ports are the servers connected to?
0
Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

 
t-recsAuthor Commented:
Vlan 20 client connects to port 5
Vlan 10 server connects to port 17 (IP 192.168.10.106)

The Vlan 10 client is actually a cable modem and I'm trying to reach it's web based config page.
0
 
Don JohnstonInstructorCommented:
Does the cable modem have a route to the 192.168.20.0 network?
0
 
t-recsAuthor Commented:
No - that's (I guess) is what I don't understand.

Would that be:

ip route 0.0.0.0/0 192.168.20.0    ?

Your help is appreciated.
0
 
Don JohnstonInstructorCommented:
ip route 192.168.20.0/24 192.168.10.1
0
 
t-recsAuthor Commented:
hmmmm...

When I attempt this I get the error " 192.168.10.1 cannot be switch IP address and route gateway  at same time"
0
 
Don JohnstonInstructorCommented:
This route has to go on the cable modem. Not the switch.
0
 
t-recsAuthor Commented:
Well......it finally sunk in...
You know - the forest through the trees..........

Thanks so much -- working graeat!!!

0
 
t-recsAuthor Commented:
Prompt and accurate
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Protect Your Employees from Wi-Fi Threats

As Wi-Fi growth and popularity continues to climb, not everyone understands the risks that come with connecting to public Wi-Fi or even offering Wi-Fi to employees, visitors and guests. Download the resource kit to make sure your safe wherever business takes you!

  • 6
  • 5
Tackle projects and never again get stuck behind a technical roadblock.
Join Now