Send connector error exchange 2010

On Exchange 2010 server I have 2 send connectors one for "all email" and it uses smart host to barracuda and works fine. The other send connector we use for sharepoint and address space is sharepoint.domain.local and uses DNS.

The problem is with the sharepoint, emails send internally ok, but externally they give this error
the server response was 5.7.1 unable to relay...see attached

How can I correct this? On the Exchange 2003 server I had relaying on internal subnets as shown in the screenshot.

What do I need to do? Since I do not know what all this means please explain.
Thanks!     relay errorrelay-2003.JPG
LVL 7
tolinromeAsked:
Who is Participating?
 
tolinromeAuthor Commented:
Problem solved by editing registry in sharepoint server to remove old mailserver settings.
0
 
tolinromeAuthor Commented:
anyone?
0
 
amenezes0617Commented:
I have Sharepoint internally, I can send emails to it from inside and outside my network, but I don't have a send connector.
Just a contact in AD where the SMTP address uses the @sharepointserver.domain.local internal DNS name.
But my sharepoint and exchange servers are in the same domain. Are yours?
0
Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

 
tolinromeAuthor Commented:
Yes, same domain. You dont have a send connector?
I followed this article exactly but it still doesnt work.
http://exchangeserverpro.com/how-to-configure-a-relay-connector-for-exchange-server-2010
0
 
amenezes0617Commented:
No. All I have is the contact with the address like I said above. And the smtp service running on the sharepoint server. Tomorrow I can give you more details.
0
 
tolinromeAuthor Commented:
I'm really stuck on this since no emails are going out from this connector. Any help? Thanks.
0
 
amenezes0617Commented:
Just to confirm, are you trying to receive emails into a Sharepoint library or send emails from Sharepoint?
0
 
amenezes0617Commented:
Try this document, I believe I followed it, but I have gone through an AD migration and don't really have a connector now, but I did in the beginning.
http://sharepointgeorge.com/2010/configuring-incoming-email-sharepoint-2010/

0
 
tolinromeAuthor Commented:
I wil llook at the document now. I'm trying to send emails from sharepoint, through exchange to external recipients.
0
 
amenezes0617Commented:
Oh, then my apologies, I misunderstood your question, these instructions are for receiving emails into Sharepoint.
Perhaps what you need is to allow that connector to relay.
Try this: (change "Annonymous Relay" to the name of your connector)

Get-ReceiveConnector "Anonymous Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
0
 
tolinromeAuthor Commented:
thats ok, how woudl I do that through the EMC?

basically if you look atthe screenshots you'll see what I had on 2003 server and I just cant seem to replicate that on 2010. Driving me crazy.
0
 
amenezes0617Commented:
You can't do that via EMC, just open the command shell and run that line with the proper send connector name.
0
 
amenezes0617Commented:
Try this:
http://sharepointgeorge.com/2010/configuring-outgoing-email-sharepoint-2010/

I think what you probably need is a receive connector, not a send one. That's what that command above applies to.
0
 
tolinromeAuthor Commented:
Problem solved by editing registry in sharepoint server to remove old mailserver settings.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.