Commands to change Cisco Access Point keys

Can anyone give me the correct commands to change the pre-shared wpa-psk key on a ssid? Currently I am having to change them manually monthly via GUI as we have our guest keys change at that interval. But if I could get the correct commands I could automate the process across all our AP's.
uwgtolAsked:
Who is Participating?
 
uwgtolConnect With a Mentor Author Commented:
Figured it out, this is the commands that worked:

UWGT-AP.2#enable
UWGT-AP.2#config t
Enter configuration commands, one per line.  End with CNTL/Z.
UWGT-AP.2(config)#dot11 ssid batman
UWGT-AP.2(config-ssid)#wpa-psk ascii batmobile65
UWGT-AP.2(config-ssid)#end
UWGT-AP.2#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
UWGT-AP.2#
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
ap1130AG# configure terminal

ap1130AGconfig-ssid)# wpa-psk ascii batmobile65

ap1130AG(config-ssid)# end



0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
but you'll have to complete it like this:-

ap1300AG# configure terminal

ap1300AG(config-if)# ssid batman

ap1300AG(config-ssid)# wpa-psk ascii batmobile65

ap1300AG(config-ssid)# end


0
Improved Protection from Phishing Attacks

WatchGuard DNSWatch reduces malware infections by detecting and blocking malicious DNS requests, improving your ability to protect employees from phishing attacks. Learn more about our newest service included in Total Security Suite today!

 
uwgtolAuthor Commented:
Thanks, the problem I am having is when I enter ssid I never get (config-if-ssid), it remains (config-if). I thought maybe I was missing something. Is there something else I am missing?
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
very strange, it should give you a config-ssid prompt.
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
depends on the version of software.
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
does this command work for you~?

configure interface dot11radio 0

e.g.

ap1300AG# configure terminal

ap1300AG(config)# configure interface dot11radio 0

ap1300AG(config-if)# ssid batman

ap1300AG(config-ssid)# wpa-psk ascii batmobile65

ap1300AG(config-ssid)# end

0
 
uwgtolAuthor Commented:
These were the only way to enter the commands to work properly.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.