I Can't Access web interface for Cisco Wirless AP /air-lap1242ag-e-k9 /


I have a Cisco Access Point Model (cisco air-lap1242ag-e-k9 ) , i want to enter AP web interface but i can't .

i do show flash command i found these Files :

-Config.txt
-Private-multiple-fs
-C1240-rcvk9w8-mx
-env_vars

so what can i do to open AP GUI interface ?????????

Thanks
LVL 4
Muhammed-RummanehAsked:
Who is Participating?
 
lfredaConnect With a Mentor Commented:
You need to convert the AP to IOS and make it a stand-alone access point since the model you purchased is a lightweight (This is what the L stands for in LAP1242).  Alternatively, you can return the LAP1242’s and buy AP1242’s
 
To do this you will need the IOS Image for that AP, a TFTP Server, and follow the directions in this link
 
http://www.cisco.com/en/US/docs/wireless/access_point/1240/installation/guide/124h_c3.html#wp1038660
0
 
lfredaCommented:
Is it connected to a Cisco Wireless Lan Controller (WLC)?
0
 
Muhammed-RummanehAuthor Commented:

No
0
 
Muhammed-RummanehAuthor Commented:

I bought ( 8 ) Access Point only , i want to configure each AP alone using GUI interface .. i worked with many different vendor like ( D-Link , Linksys  ) as you know these model of AP has built-in web interface ...
is these AP Point ( air-lap1242ag-e-k9 ) different .....????
please help..
0
 
Muhammed-RummanehAuthor Commented:
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.