limmontreefree
asked on
strange behavior in Adaptec RAID controller
I have an Adaptec 1430SA:
1 .- I have two disks attached to the controller, with the application of management will not let me create a raid 1 (mirror) with them.
2 .- I access to the BIOS of the card by pressing [CTRL + A], I build the raid and start the server. I Can see a unit disk (the RAID) in the disk manager, çi format and functioning properly.
3 .- I go to the RAID management program and tells me no disk or logical drive.
I tried to update the software but have not found a more modern
Any idea?
1 .- I have two disks attached to the controller, with the application of management will not let me create a raid 1 (mirror) with them.
2 .- I access to the BIOS of the card by pressing [CTRL + A], I build the raid and start the server. I Can see a unit disk (the RAID) in the disk manager, çi format and functioning properly.
3 .- I go to the RAID management program and tells me no disk or logical drive.
I tried to update the software but have not found a more modern
Any idea?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
http://www.adaptec.com/en-us/speed/raid/aar/fw_bios/1430sa_bios_b2507_exe.htm,
and the console in
http://www.adaptec.com/en-us/speed/raid/storage_manager/asm_windows_x64_v6_50_18584_exe.htm
But there say "This BIOS should only be used together with Driver v1.6.11998.3 and Adaptec Storage Manager version 6.50.18584"
Have I to update the windows driver? Do you know where the lastest driver?
Thanks.