Williams225
asked on
STK 6540 HOW TO CHANGE A VOLUME TO PREFERED CONTROLER
Hi team,
We found out on our storage thats some volumes are not controlled by thier prefered controleur and is creating a bit on inconvinience in the system. Is there a proceedure to change all volumes to their prefered controler?
Please help. Volume-Controleur.txt
We found out on our storage thats some volumes are not controlled by thier prefered controleur and is creating a bit on inconvinience in the system. Is there a proceedure to change all volumes to their prefered controler?
Please help. Volume-Controleur.txt
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
One more question, what are the prerequisites?
ASKER
Volume name: ilmdatabse_log
Volume handle: 42
Volume WWN: 600A0B8000470BF80000133C49
Status: Optimal
Preferred owner: Tray.85.Controller.B
Current owner: Tray.85.Controller.A
Capacity: 20 GB (21,474,836,480 Bytes)
Raid level: RAID 1
Segment size: 512 KB
Reconstruction priority: 1
Associated volume group: VolumeGroup.3
Read cache enabled: true
Read cache active: true
Write cache enabled: true
Write cache active: true
Write cache without batteries: false
Write cache with mirroring enabled: true
Write cache with mirroring active: true
Flush write cache after (in seconds): 10
Cache read ahead multiplier: 3
Media scan enabled: true
Media scan with parity check: false