troubleshooting Question

Cannot Ping through my ASA5510

Avatar of sscottinandrews
sscottinandrews asked on
Hardware FirewallsNetworking Hardware-OtherNetwork Security
24 Comments1 Solution837 ViewsLast Modified:
I am having a bit of an issue currently setting up an ASA510. I have had a couple of questions on here before but this is a totally different appliance.
I have added routes such as: listed below is a Cisco 2921 that is the next hop via the switch:
route outside 65.36.x.x
route inside 1
route inside 1
route inside 1
route inside 1
route inside 1
route inside 1
route inside 1
route inside 1
route inside 1

If I am on the ASA itself I can ping which is the router on the 4.1 network. I can do the sane for 2.1, 3.1, 5.1 and so forth when I am pinging from the ASA.

I have a computer connected via  switch that accesses the Inside interface of, the PC is addressed as,, respectively. I cannot ping any of the above networks such as

On an additional note I can ping anything 10.11.6.x and it ping fine from the computer.

What route/ACL/NAT or whatever am I missing???

Any help would be greatly appreciated.

I can also add a visio if needed??

Thank you!!!

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 24 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 24 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros