troubleshooting Question

HP Z210 Workstation with Add-in RAID Card

Avatar of dsiefert
dsiefertFlag for United States of America asked on
DesktopsServer Hardware
3 Comments1 Solution991 ViewsLast Modified:
I have a HP Z210 workstation that we've added an Intel RAID card (model RS25DB080) to.  System boots fine no post errors and we see the BIOS from the RAID card and that it sees all 3 drives we have connected to it.  However when we hit CTRL+G to enter the BIOS for the Intel RAID card it recognizes the key stroke as the message changes to "will enter BIOS when post completes" but it nevers enters the BIOS it moves right along to attempting to load the OS.

Looking for some ideas, we've disabled the onboard RAID controller and set it to do a full boot so we could catch any error messages but we aren't seeing any at all.
Join our community to see this answer!
Unlock 1 Answer and 3 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 3 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros