Link to home
Start Free TrialLog in
Avatar of Eprs_Admin
Eprs_AdminFlag for Austria

asked on

setup of email notification in Equallogic

Hi Experts,

I have a EQUALLOGIC PS4100E running. The EQUALLOGIC and the HOSTS are connected over a SANSTACK. This network is isolated and has no access to outside. This network is a 192.168.11.0 network.

But I need to configure the email alerting to DELL, when a error comes up.
My SNMP server is in the 198.x.x.0 Network.

How I have to configure it ?
SOLUTION
Avatar of kevinhsieh
kevinhsieh
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Eprs_Admin

ASKER

I have two management ports, on each controller.
When I configure them, then it is possible to send the email notifications ?
Can you make an example please ?
ASKER CERTIFIED SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Hi,
thanks for the help, but I have a problem to connect to the port.
When I connect the management port to my management switch to my vlan 175 then I cannot connect.
When I change the port on my management switch to the vlan 197 then I can connect.
But I need the vlan 175, this is my Management vlan.

where is the error ?
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial