troubleshooting Question

Cisco ASA 5505 PAT question

Avatar of gopher_49
gopher_49 asked on
Cisco
4 Comments1 Solution714 ViewsLast Modified:
I have a Cisco ASA 5505 running os 8.2(1).  I want to setup a PAT for a sip server in my lab...  Let's say my outside interface is 192.168.1.1 and my inside interface is 192.168.10.1.  My voip server is 192.168.10.169.  I want to perform a PAT on my outside interface to 192.168.10.169 on udp 5060.  What is the exact syntax?  Below are my access list and command to bind it to my interface.

access-list outside extended permit udp any host 192.168.10.169 eq 5060
access-group outside in interface outside
ASKER CERTIFIED SOLUTION
Jimmy Larsson, CISSP, CEH
Network and Security consultant

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 4 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 4 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros