HalCHub
asked on
vpn into win 7 clients not able to see network
My target network is 10.0.0.x network
When I vpn in and assign an address of 10.0.0.250 which is not assigned by the dhcp server but by the vpn target I am unable to see resources on the network even though I have allow clients to see local area network checked.
The vpn target machine is a windows 7 ultimate with all service packs applied.
I check ipconfig and notice that it was assigned a subnet mask of 255.255.255.255. How do I get it to be 255.255.255.0
Thanks
When I vpn in and assign an address of 10.0.0.250 which is not assigned by the dhcp server but by the vpn target I am unable to see resources on the network even though I have allow clients to see local area network checked.
The vpn target machine is a windows 7 ultimate with all service packs applied.
I check ipconfig and notice that it was assigned a subnet mask of 255.255.255.255. How do I get it to be 255.255.255.0
Thanks
ASKER
It is not a cisco vpn
its the windows client going to windows 7 ultimate as rras server
gre and 1723 are open
its the windows client going to windows 7 ultimate as rras server
gre and 1723 are open
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I fixed it my self
Sounds like Cisco VPN client? If so is this the problem?
Cisco VPN Client Connects but no traffic will Pass
Pete