kswan_expert
asked on
Migrate\move EVA 4400 Management Server to another box
We have an EVA4400 with a PC attached with an HBA card installed which is attached to the EVA and runs the management software for the EVA. We want to move this to another server and are note sure if it’s as simple as just imaging the old box, move the HBA card to new server, restore image and hey presto…. back in business!
We’re going to use ShadowPtotect and do a Hardware independent restore to restore to dissimilar HW. We’re fine with restoring the image but are not sure if we can simply move the HBA card over and everything will work again once we reattach. Will this work or will we need to do any rezoning or suchlike?
Or, is there another way we should do this?
Cheers
We’re going to use ShadowPtotect and do a Hardware independent restore to restore to dissimilar HW. We’re fine with restoring the image but are not sure if we can simply move the HBA card over and everything will work again once we reattach. Will this work or will we need to do any rezoning or suchlike?
Or, is there another way we should do this?
Cheers
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.