thebuyguy
asked on
AutoCAD 2007 and Navisworks Simulate 2012
This one is pretty obscure but here goes...
We have a client who has Navisworks 2012 installed on a terminal server. They use the app to build 3D models from AutoCAD 2007 drawings. Their AutoCAD 2007 setup includes Bentley Autoplant v8i. This means that when the drawings are imported and built as models the correct shapes do not come with the drwaings (i.e. pipes are square).
I need object enablers for Bentley Autoplant v8i that support:
1. AutoCAD 2007
2. Windows Server 2008 R2
So far I have not been able to locate these via Bentley support.
I believe the actual answer is 'upgrade' but I thought I would take a shot.
Even knowing that it CAN'T be done would be helpful. Thanks!
We have a client who has Navisworks 2012 installed on a terminal server. They use the app to build 3D models from AutoCAD 2007 drawings. Their AutoCAD 2007 setup includes Bentley Autoplant v8i. This means that when the drawings are imported and built as models the correct shapes do not come with the drwaings (i.e. pipes are square).
I need object enablers for Bentley Autoplant v8i that support:
1. AutoCAD 2007
2. Windows Server 2008 R2
So far I have not been able to locate these via Bentley support.
I believe the actual answer is 'upgrade' but I thought I would take a shot.
Even knowing that it CAN'T be done would be helpful. Thanks!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
This was ultimately solved by a change in the project requirements (i.e. no solution was available)
ASKER
This was ultimately solved by a change in the project requirements (i.e. no solution was available)
Reference: http://communities.bentley.com/other/old_site_member_blogs/bentley_employees/b/joeys_blog/archive/2011/05/02/64-bit-object-enabler-for-autoplant-v8i.aspx