Solved

Netgear FVS318N VPN Appliance

Posted on 2012-03-12
2
733 Views
Last Modified: 2012-03-13
I recently purchased the above router, I a running verizon FIOS, no problems internally and no roblems to the internet.  When I go to create an inbound policy,(Port forwaring) the port never opens.  Does anyone know off the top of their head where and how in the router this needs to be configured?  I have been on hold with NetGear for the last week and they have yet to answer the question.  They attempted to install a newer version of the firmware, didn't work and I have even replaced the router.  Port 443 for remote admin purposes is somehow open by default without adding a route or a rule.  The 323 page manual is not an easy read.  If anyone has ever done this, please share the wealth
0
Comment
Question by:jaytechnology
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 76

Accepted Solution

by:
Alan Hardisty earned 500 total points
ID: 37712539
You should go to Security> Firewall> LAN WAN Rules and add an Inbound Rule for whatever you need to add.
0
 

Author Closing Comment

by:jaytechnology
ID: 37717685
Thank you sir
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Resolve DNS query failed errors for Exchange
An article on effective troubleshooting
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question