Solved

Dail- peer Problem

Posted on 2012-03-12
2
375 Views
Last Modified: 2012-03-13
Hello ,
 Could you help me please? I am having problem translation-rule on CME.
 I have 4 VOIP Dial-peer to remote branche office on my Main office. Other  Branches are fine
but the fourth one has the same extension like one of the branch (Frankfurt Office)
Here is the Topology
                                                                    /--------[CME-BERLIN]
                                                                  /---------[CME-Frankfurt]
                                 [MAIN-Office-CME]----------{WAN}-------[CME-Denmark]
                                                                                       \
                                                                                         \------------[CME-LONDON]


Berlin CME has 201 - 210 Extension number , while Frankfurt has 2001 - 2040 Extension Number.
When I applied destination-pattern 2../(20X) on Berlin Dial-Peer, I can call to Berlin Branch office,
but i can not call Frankfurt Via WAN with (20XX)/2...
When I removed 2.. on Berlin Dial-peer and created tranlation Rule 7 for Berlin on Main office CME.
The translation-rule works fine on MAIN-OFFICE_CME, but i can not make calls to Berlin Extension , but can make with DID number 792623.. via WAN, but 2..2 is not work


OUT-PUT
========
1.)
MAIN-OFFICE_CME#test voice translation-rule 7 0045202
Matched with rule 1
Original number: 0045202        Translated number: 79262202
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none

MAIN-OFFICE_CME#test voice translation-rule 7 0045212
Matched with rule 1
Original number: 0045212        Translated number: 79262212
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none

2.)
Configuration on Main-ofice CME
======================
voice translation-rule 7
 rule 1 /0045\(2..\)/ /79262\1/
!
voice translation-profile CME_TEHO-OUT
 translate calling 7
 translate called 7
!
dial-peer voice 1001 voip
 description TEHO-2-SITE LONDON_CME
 destination-pattern 4...
 session target ipv4:192.168.44.2
 dtmf-relay h245-alphanumeric
 codec g711alaw
 no vad
!
dial-peer voice 1002 voip
 description TEHO-2-FRANKFURT_CME
 destination-pattern 2...
 session target ipv4:192.168.49.2
 dtmf-relay h245-alphanumeric
 codec g711alaw
 no vad

dial-peer voice 1003 voip
 description TEHO-2-DENMARK_CME
 destination-pattern 3...
 session target ipv4:192.168.45.2
 dtmf-relay h245-alphanumeric
 codec g711alaw
 no vad

dial-peer voice 1004 voip
 description THEO-2-BERLIN_CME
 translation-profile outgoing BERLIN_TEHO-OUT
 destination-pattern 792623..
 session target ipv4:192.168.149.2
 dtmf-relay h245-alphanumeric
 codec g711alaw
 no vad

 3.)
Configuration on Berlin-CME
==================

dial-peer voice 1002 voip
 description TEHO-2-MAIN-OFFICE_CME
 destination-pattern 1...
 session target ipv4:10.10.49.2
 dtmf-relay h245-alphanumeric
 codec g711alaw
 no vad


Any Help please ?
0
Comment
Question by:Davgadaze
  • 2
2 Comments
 

Accepted Solution

by:
Davgadaze earned 0 total points
ID: 37714167
Hello all,
 
Here is the solution;


Creat Steering code ( like Prefix) or you will have to use the T for
overlapping dial plans.

(A)
dial-peer voice 200 voip
destination-pattern 2..T
session target ipv4:10.10.X.2

=====and==

dial-peer voice 2000 voip
destination-pattern 2...
session target ipv4: 10.20.Y.2

You can press # so you don't have to wait 10 seconds, but you will
either create a steering code or wait 10 seconds.

HTH
0
 

Author Closing Comment

by:Davgadaze
ID: 37714172
If you want steering code , you will need to configure Translation rule or num-exp
Regards,
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Ever wanted to query Cisco Call Manager CDR records from MS SQL Server? Here's how! CUCM can be configured to upload a CDR file to a given FTP server every minute. This article will show you how to set this up, schedule the import of this data an…
Almost all Internet protocol telephones have built-in switches at the back that allow you to connect your personal computer to one port and use the other port to connect your phone to to a Cisco switch.   Why we need to connect the PC to the pho…
This Micro Tutorial will give you a basic overview how to record your screen with Microsoft Expression Encoder. This program is still free and open for the public to download. This will be demonstrated using Microsoft Expression Encoder 4.
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now