Solved

MPLS (IPVPN) Will it cause problems

Posted on 2012-03-13
1
389 Views
Last Modified: 2012-03-26
I will be activating a MPLS circuit mainly for voice traffic on our new IP phone system.  The question I have though pertains more to the network infrastructure and specifically if I will be creating a conflict or problem.  Here is what we currently have in our two sites:

Michigan Site: ABC.Local
Server 2008 R2 Primary DC (holds all roles) with Exchange 2010 installed
10.1.1.0 255.255.255.0 (Data Vlan 200 on switches)
172.16.10.0 255.255.255.0 (Voice Vlan 100 on switches)
Washington Site: XYZ.Local
SBS 2008
192.168.16.0 255.255.255.0 (Data Vlan 200 on switches)
172.16.11.0 255.255.255.0 (Voice Vlan 100 on switches)

The MPLS circuit has managed routers and will be routing both the data and voice vlan.  I understand that SBS is supposed to be the only Primary DC (holding all roles) in a network, by activating a MPLS circuit with the Data vlan routing between subnets will I create a conflict and throw the SBS into an hourly reboot until I remove the Data vlan or should I be ok?
0
Comment
Question by:Rafar32
1 Comment
 
LVL 17

Accepted Solution

by:
Spartan_1337 earned 500 total points
ID: 37714313
SBS servers on different domain so that will not affect you in this scenario. The only time it will begin that reboot cycle if another SBS server is detected on same domain.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now