Solved

Build a standalone TMG 2010 Array

Posted on 2012-03-13
3
1,366 Views
Last Modified: 2012-06-21
Dear All,

I’m planning to build a high available TMG 2010 using two servers, configure a standalone array. I need to ask, if the array manager goes down, does the other TMG server will continue work and it will provide the same services or not?

And does there any limitations using standalone array?

How many server it support?

Thanks
0
Comment
Question by:ACS2012
3 Comments
 
LVL 51

Accepted Solution

by:
Keith Alabaster earned 250 total points
ID: 37715311
The answer is yes - but it is all down to how you install the product and then how you configure things. e,g, Management server, array nodes, configuration backup regime etc. Remember TMG is licensed per processor.

Would strongly suggest you raed the TechNet guides on implementation guidance before you even started.

Secondly, in the same vein, write down your requirements and the logical flow (inbound and outbound) against your IT security policy before you start also. Makes installation the easy part.
0
 

Author Comment

by:ACS2012
ID: 37717284
is there any links can help?

how to do the probable installation?
0
 
LVL 3

Assisted Solution

by:rafter81
rafter81 earned 250 total points
ID: 37728620
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now