?
Solved

Brother MFC 8890 DW

Posted on 2012-03-13
3
Medium Priority
?
871 Views
Last Modified: 2012-04-12
Hello All,

Does any one know how to configure Brother MFC 8890 DW printer all in one for scanning in to email?

Just want to add this is network printer.
0
Comment
Question by:Razor74
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 3

Accepted Solution

by:
MikeyLLB earned 1002 total points
ID: 37717699
0
 
LVL 55

Assisted Solution

by:Joe Winograd, EE MVE 2015&2016
Joe Winograd, EE MVE 2015&2016 earned 498 total points
ID: 37717741
I suggest that you download and install what Brother calls the Full Driver & Software Package. It is available for your MFC at:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfc8890dw_all

Be sure to select the right OS. Then download the Software User's Guide:

http://welcome.solutions.brother.com/BSC/public/files/dlf/doc002446/cv_dcp8080n_usaeng_soft_b.pdf

On page 52 is a section called "Scan to E-mail". It shows exactly how to do it. Regards, Joe
0
 
LVL 3

Assisted Solution

by:MikeyLLB
MikeyLLB earned 1002 total points
ID: 37717770
The solution posted by joewinograd is for scanning using either Outlook or Outlook Express on a PC with a direct (USB) connection to the printer in question. For a networked printer, using an e-mail server may be a better option. Scan to e-mail server is on page 204 of the second link posted by joewinograd
0

Featured Post

Four New Appliances. Same Industry-leading Speeds.

But don't take it from us.  The Firebox M370 is Miercom tested and Miercom approved, outperforming its competitors for stateless and stateful traffic throughput scenarios.  Learn more about the M370, M470, M570 and M670 and find the right solution for your organization today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses
Course of the Month9 days, 17 hours left to enroll

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question