Solved

3COM Switch 4800G PWR 48-Port console login  via Roll over and getting IP

Posted on 2012-03-14
1
747 Views
Last Modified: 2012-03-18
I am using “3COM Switch 4800G PWR 48-Port” and I want to get its IP to manage it via web.
My switch is connected on network and getting IP from DHCP windows server but when I scan IP or my network its not coming in scan.
Now I want to connect it with Console(RJ45-to-RJ45 roll over cable) but when I connect it with roll over cable link is not going up.
Please help me to get IP of this switch via console. I have only RJ45 port on my laptop to connect with console.
0
Comment
Question by:nainasipra
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 9

Accepted Solution

by:
jfrady earned 500 total points
ID: 37719769
If you can't find the IP by scanning the network look in your DHCP server to find the lease IP info by the MAC address of the switch.

If you do not have a DB9 serial connection on your laptop you will need a USB/Serial convertor.  The RJ45 on your laptop is Ethernet and not a serial connection.
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Outsource Your Fax Infrastructure to the Cloud (And come out looking like an IT Hero!) Relative to the many demands on today’s IT teams, spending capital, time and resources to maintain physical fax servers and infrastructure is not a high priority.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question