Solved

Internet Access Through PPTP

Posted on 2012-03-14
3
394 Views
Last Modified: 2012-04-07
Everyone, I have a Win2003 PPTP server, and it works great.  We have multiple internal subnets, and I just set up static routes from within the PPTP server to get people access to those other subnets.  Access to our internal network works fine.

What I want is to get clients access to the internet THROUGH our PPTP server.  In addition to the PPTP server, we have a firewall.  I was hoping to route through that firewall somehow but I 'm trying to reconcile how that would work with the current config.  Seems like I'd need to have a default route on the internal interface of the PPTP server along with the external interface, but it doesn't seem like that would work.

I DON'T want them to have to uncheck "use default gateway on remote network" to get this to work.

Thank you,
-S
0
Comment
Question by:schnibitz
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 30

Expert Comment

by:pgm554
ID: 37722096
0
 

Accepted Solution

by:
schnibitz earned 0 total points
ID: 37722983
I got this working.  You can set static routes in the RAS server, so all I did was create a 0.0.0.0 rule that points to the next hop on the internal network.  That seemed to work.

-M
0
 

Author Closing Comment

by:schnibitz
ID: 37818714
Fixed my own prob
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question