Solved

Reload Cisco 2801

Posted on 2012-03-14
3
555 Views
Last Modified: 2012-03-15
My 2801 had the flash card go corrupt.  TAC sent me a new flash card.  They were trying to use XMOdem to load the router...isn't there an easier way?  I have the BIN file on my PC.

Appreciate any help.
0
Comment
Question by:dougp23
  • 2
3 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 395 total points
Comment Utility
isn't there an easier way?

Yes and no.  "Easy" is relative. :-)

http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_rommon.html#wp1070700

tftpdnld is easier than xmodem, but not as easy as copying it to the card on a working 2800.
0
 
LVL 1

Author Comment

by:dougp23
Comment Utility
Thanks Don.  No matter what I specify for a TFTP timeout, it keeps disconnecting me with a timeout.  I will do what you said with copying it on a working 2800.
0
 
LVL 50

Expert Comment

by:Don Johnston
Comment Utility
Probably a misconfiguration. Verify the address, mask, server address, filename, etc.
0

Featured Post

What Should I Do With This Threat Intelligence?

Are you wondering if you actually need threat intelligence? The answer is yes. We explain the basics for creating useful threat intelligence.

Join & Write a Comment

Suggested Solutions

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now