Want to win a PS4? Go Premium and enter to win our High-Tech Treats giveaway. Enter to Win

x
?
Solved

Assigning Admin Rights to Volume

Posted on 2012-03-14
4
Medium Priority
?
630 Views
Last Modified: 2013-11-12
Hello,

I installed a Netware 6.5 system under vmware. I created a default admin account called Oper1. I also created an additional volume called DATA and now I have a SYS and DATA volume. My next task was to install GroupWise 7.04 onto this system. So, I setup a Windows 7 computer and began to install GroupWise Server 7.04. Each time I tell GroupWise to write to my Data share or my SYS volume I get an Access Denied message. Why is that? How can I ensure my admin user, which is Oper1, has access to all my volumes and will not be denied access? This should have been enabled by default, so I am very curious what the problem is.

By the way, I looked at ConsoleOne and it appears that Oper1 has access to all of the volumes.

Thanks in advance,
John
0
Comment
Question by:jhieb
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 19

Expert Comment

by:deroode
ID: 37728236
Is this a groupwise install problem, i.e. does it only occur when installing Groupwise, or can't you write to the volumes at all?
0
 
LVL 1

Author Comment

by:jhieb
ID: 37729295
Yes, it seems to be a Groupwise install problem. I can manually create folders on the drive. But, perhaps something else is going on too. Even if I install into the folders I create first, Groupwise will not start after the install. I did not have this problem with Groupwise 8 or 2012, which are installed on different netware servers.
0
 
LVL 19

Accepted Solution

by:
deroode earned 2000 total points
ID: 37737056
Are you sure you only need rights on the volumes. It seems to me you should have Supervisor Access to eDirectory as well. Can you verify that?
0
 
LVL 1

Author Comment

by:jhieb
ID: 37738772
No, and how do you want me to certify that? I am surprised I am being asked for rights at all. I installed Netware fresh like I always have, and I am using the Admin account to install GroupWise. Perhaps, like you said, this is a GroupWise 7.04 install problem and not a rights issue at all.
0

Featured Post

Plesk WordPress Toolkit

Plesk's WordPress Toolkit allows server administrators, resellers and customers to manage their WordPress instances, enabling a variety of development workflows for WordPress admins of all skill levels, from beginners to pros.

See why 2/3 of Plesk servers use it.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Suggested Courses

610 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question