Solved

Site to Site VPN and Remote VPN

Posted on 2012-03-15
3
429 Views
Last Modified: 2012-03-15
I have a main office (A) with 40 Mbps ADSL internet line and one branch office (b) with 512 kbps internet line in UAE and one office in saudi with 512 kpbs internet line

office (b) cannot upgrade the internet speed because of the service provider but can use 3g USB dongle internet

presently we have two draytek router in office A and B and using the DYNDNS service we have established a site to site vpn to access file across and access software based and webbased ERP from Main office .The accessiblity is a diaster.

from the ISP side only option i have is to go for 3G USb with 7.2 Mbps internet line

just upgrading the internet line with boost the speed with the same draytek 2820 router vpn or we have to choose any other router like cisco,sonic wall or fortigate

please suggest a suitable solution with 40Mbps ADSL (DHCP Ipaddress) and 7.2 Mbps 3G usb modem where i have a descent access on the file and software
0
Comment
Question by:ManojPS
  • 2
3 Comments
 
LVL 19

Accepted Solution

by:
Kash earned 500 total points
ID: 37723834
the draytek in question is more than capable for what you are wanting it to do so I would stick to it.

If I were you where the internet is not so fast, instead of having site to site VPN, i would just have a dial in VPN access when people needed to access file server. that way you are saving valuable bandwidth.

or the other option would to be have a local replica of shares on each site. no need to put expensive servers in, a NAS could do a good job. it all depends on how big the company is.
0
 

Author Comment

by:ManojPS
ID: 37724074
Thanks Innocentdevil with the 3g modem connection of 7.2Mbps will it increase my perfomance and can you suggest that with old dsl internet connection is it possible to route only my access to normal internet ,emails and other stuff and dedicate the 3g connection only for VPN Access as here there is a download limit for 3g modem an beyond the limit the charge is not effortable
0
 
LVL 19

Expert Comment

by:Kash
ID: 37724166
may be. I would do a speed test on 3G modem. is it a dedicated line, if it is, then you should be getting full 7.2 Mbps and in that case you should be able to route VPN access to that modem. hope this helps
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco ASA two factor VPN 3 54
Windows 10 VPN? 6 86
IT Contract Fee 17 148
Telco & Point to Point Internet VPN 3 99
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
Some of you may have heard that SonicWALL has finally released an app for iOS devices giving us long awaited connectivity for our iPhone's, iPod's, and iPad's. This guide is just a quick rundown on how to get up and running quickly using the app. …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question