Solved

HP Lefthand Multisite cluster

Posted on 2012-03-15
4
414 Views
Last Modified: 2012-06-22
I have two sites site A and site S.

Site A has Nodes 1 and 2 and Site S has Nodes 2 and 3.
The four nodes are part of a multisite cluster.

Nodes 1 and 2 are on subnet 172.16.123.0/24 (Primary)
Nodes 2 and 4 are on subnet 172.16.124.0/24
FOM is also on 172.16.123.0/24

When perfroming tests like taking one node down at a time all works fine, also if i take two nodes down which means a site is down all works fine and by this i mean that the storage volumes presented are still accessable, once reconnected all syncronizes and is back to normal.

I only experaince problems when i bring a Node down from each site at the same time..the volumes are lost and marked as Not Availabile. (Please see attached)

Any ideas?
multisite1.jpg
0
Comment
Question by:Jack-Black
  • 2
4 Comments
 
LVL 119
ID: 37727170
are you on the latest versions?
0
 

Accepted Solution

by:
Jack-Black earned 0 total points
ID: 37727270
Yes
0
 
LVL 55

Expert Comment

by:andyalder
ID: 37893772
What was the answer? Move the FOM to a 3rd subnet?
0
 

Author Closing Comment

by:Jack-Black
ID: 37909688
Configuration is not supported.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

If we need to check who deleted a Virtual Machine from our vCenter. Looking this task in logs can be painful and spend lot of time, so the best way to check this is in the vCenter DB. Just connect to vCenter DB(default DB should be VCDB and using…
HOW TO: Connect to the VMware vSphere Hypervisor 6.5 (ESXi 6.5) using the vSphere (HTML5 Web) Host Client 6.5, and perform a simple configuration task of adding a new VMFS 6 datastore.
Teach the user how to use configure the vCenter Server storage filters Open vSphere Web Client:  Navigate to vCenter Server Advanced Settings: Add the four vCenter Server storage filters: Review the advanced settings: Modify the values of the four v…
This video shows you how easy it is to boot from ISO images for virtual machines with the ISO images stored on a local datastore on the ESXi host.

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question