?
Solved

Creating some static routes with DD-WRT

Posted on 2012-03-15
2
Medium Priority
?
992 Views
Last Modified: 2012-03-30
Hey guys,

I have 5 IPs available to me and would like to get my router configured to map / bind some LAN addresses to the WAN.

I just flashed my router (Cisco E2500) and now have DD-WRT running on it. I set up the initial static IP just fine.

What I'm trying to figure out is, how can I map specific LAN IPs to specific static WAN IPs?

For example:

all DHCP clients (192.168.1.50-100) - WAN IP1 (configured fine)
static 192.168.1.101 - WAN IP2
static 192.168.1.102 - WAN IP3
static 192.168.1.103 - WAN IP4
static 192.168.1.104 - WAN IP5
0
Comment
Question by:mcainc
2 Comments
 
LVL 44

Accepted Solution

by:
Darr247 earned 2000 total points
ID: 37727793
0
 

Author Closing Comment

by:mcainc
ID: 37789929
thanks!
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Originally, this post was published on Monitis Blog, you can check it here . It goes without saying that technology has transformed society and the very nature of how we live, work, and communicate in ways that would’ve been incomprehensible 5 ye…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

599 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question