Solved

RHEL6 problem with 2 NICs

Posted on 2012-03-15
5
631 Views
Last Modified: 2012-03-20
I have 2 PCs
PC1 (RHEL5): 2 NICs: 172.29.137.111, 172.29.139.111
PC2 (RHEL6): 2 NICs: 172.29.137.109, 172.29.139.109

From PC3: 172.29.139.11, I can ping both NICs of PC1, but I can only ping 172.29.139.109 of PC2. Routing table of PC1 and PC2 is the same.

Is it related to OS or something, please help me. Thanks.
0
Comment
Question by:rvc-it
  • 3
  • 2
5 Comments
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 37728133
Hi,

It seems to me that PC2 has a different default gateway value than PC1 so that 172.29.137.109 can not route cannot send the ping reply back.

Cheers,
K.
0
 

Accepted Solution

by:
rvc-it earned 0 total points
ID: 37728321
I followed this guide
http://www.linuxhorizon.ro/iproute2.html
and I could solve it now.
Thank for your answer.
0
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 37728772
IPRoute2 a different subject altogether. You must have had a problem about routing, Default gateways, which interface the DG belongs  but I don't think this could go down to RHEL 5/6 or something like that.
0
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 37728778
Normally you would not need to add routing for any interface which is attached to the system.. There is/was a problem with your routing but somehow you've managed to circumvent it. But I don2t think this is about RHEL6.  There must be something that have altered your routing table..
0
 

Author Closing Comment

by:rvc-it
ID: 37741302
I'm not sure why RHEL5 can route automatically to outside with 2 NICs but RHEL6 doesn't.
I have to add 2 routing tables for VLAN137 and VLAN139 separately to make it works.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Access reports are powerful and flexible. Learn how to create a query and then a grouped report using the wizard. Modify the report design after the wizard is done to make it look better. There will be another video to explain how to put the final p…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now