Solved

Adsl-wifi issue

Posted on 2012-03-17
4
404 Views
Last Modified: 2012-06-22
Hi,

I have an adsl wireless router(thomson TG585V8) which is in A-Building  connected to cisco 2960 Switch  and extended to other building B-Building (A-Building Switch Adsl-vlan2  to B-Bilding Switch). From B-Blding 2960 swich Adsl-vlan2 port  connected to cisco 1242 AP. If i connect my laptop to the B-Buiding switch directly i  can browse the "internet".But from the 1242 AP i am able to get 'dchp' i can ping th gateway , i cannot browse the internet. I tried "nslookup" from my laptop ''dns issue". I am attaching the wireless ap config. Please give me an idea for this issue.

Regds Franko
grnd-floor-training-hall
0
Comment
Question by:franko555
  • 2
  • 2
4 Comments
 
LVL 5

Expert Comment

by:andrew1812
ID: 37733053
Check the following on the laptop

1. The default gateway provided on the TCP/IP adapter of the laptop by the DHCP server is the same when connected to the switch port and the access point ( Check with ipconfig)

2. The DNS server values are also the same. ( ipconfig /all). If the DNS value differs in the wireless scenario, provide the correct DNS server IP address manually on the TCP/IP adapter of the  laptop.

Also please output the result of the t\following tests

ping www.yahoo.com , when connected via access point.
0
 

Author Comment

by:franko555
ID: 37733194
IP add: 192.168.1.50
sub mask: 255.255.255.0
default gateway 192.168.1.254

dns svr 192.168.1.254

I can able to ping from the dns ,google from the cisco AP. My laptop i am not able to ping the dns,google, yahoo.


Regds

Franko
0
 
LVL 5

Accepted Solution

by:
andrew1812 earned 500 total points
ID: 37733899
When you issue ping from the laptop
ex: ping yahoo.com

Do you get the IP address on the command prompt

could you display the output when you ping yahoo.com from the laptop (command prompt message)
0
 

Author Closing Comment

by:franko555
ID: 37734295
issue is solved. changed the mgmet ip from the ADSL router
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Is your computer hacked? learn how to detect and delete malware in your PC
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question