At work i have 2 cisco wireless LAN controller connected to one switch and about 5 or more cisco access points. This is my first task as I started my new role as network support.
I do have the IP ADDRESS AND account access to the wireless controllers. This is a small branch office and they do have existing wireless SSID but it is only for network users and my task is to have another SSID created like guest and provide password.
I really need to know what steps shall i take to make this happen on the WIRELESS CONTROLLERS and let me know if you need any information and I will provide it.
This subject of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability.
This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…