Solved

Jasperserver on FreeBSD 8.2

Posted on 2012-03-17
7
655 Views
Last Modified: 2016-02-10
I would like to know if anybody succesfully installed jasperserver on FreeBSD 8.2 and running it in a production environment please?

If so do you perhaps know of a special installation procedure because the standard manual that comes with the software does not describe anything for FreeBSD.

Have tomcat running but the jasperserver simply will not start up.

Any help would be greatly appreciated!
0
Comment
Question by:duce-SA
  • 4
  • 3
7 Comments
 
LVL 24

Expert Comment

by:johanntagle
ID: 37735899
0
 

Author Comment

by:duce-SA
ID: 37735933
Thanks for pointing it out.

It seems so indeed and we are busy communicating by email.
Hopefully we can get it resolved soon.
0
 

Accepted Solution

by:
duce-SA earned 0 total points
ID: 37809584
I have enentually resolved this with a setting I did not have in my my.cnf
skip-external-locking
and then commented a setting i did have in:
#skip-networking
After reading up a bit the issue is that jasperserver uses the mysql-connector via localhost strictly to connect to mysql.
It somehow miss the UNIX socket defined on basic unix installations.
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 
LVL 24

Expert Comment

by:johanntagle
ID: 37809910
I see you are relatively new to E-E.  While I don't mind not getting points since this did not eat much of my time, I just want to point out that you mainly asked for specific leads on how to install jasperserver to freebsd, and I pointed you to the what I believe is the most popular port of the software to that OS.  So while the final solution to your problem was different, your question was still at least partially answered.  

How people can help you here depends heavily on the information you provide.  If you shared info on specific steps you have taken and error messages  you are getting, you may have found your final solution earlier here with the help of other experts, me included (i dont use freebsd but have installed jasperserver on ubuntu and centos).

Anyway, you don't have to award me points (I have more than enough :-) ).  I'm just making this comment to hopefully help you better use this site in the future.  Thanks.
0
 

Author Comment

by:duce-SA
ID: 37810207
Suggestion noted and accepted thanks.

Sorry for assuming I would not find much help here especially that there was not even a category for FreeBSD but simply asked to be pointed in the right direction for help.

At this point I might add that the person you pointed out which might be of help indeed did assist in debugging my issue but with no success at the time.

I then left it for a while and installed an Ubuntu box where I got it all working perfectly by simply following the provided installation notes. So out the box there is nothing really special with regards to this other than that really silly setting which I only discovered yesterday.

True if I posted some errors you might have been able to solve it perhaps but I had to pay attention to the ports maintainer giving me instructions and did not want to follow other procedures and mix up stuff and complicate matters for him at the time.

Had you said at the time: "post some errors and let me see if I can help" I would gladly have done so after the ports maintainer was finished. In fact I did reply with a very clear message that we were in the process of communicating. You really could have said: "let us know if you don't come right"

So truly sorry if I did not foresee the possibility that you might have been able to assist by reading between the lines you pointing me towards the ports maintainer. :)
0
 
LVL 24

Expert Comment

by:johanntagle
ID: 37810220
Point taken. See you around :-)
0
 

Author Closing Comment

by:duce-SA
ID: 37822807
Solved the problem.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

As a database administrator, you may need to audit your table(s) to determine whether the data types are optimal for your real-world data needs.  This Article is intended to be a resource for such a task. Preface The other day, I was involved …
Upgrading Tomcat – There are a couple of methods to upgrade Tomcat is to use The Apache Installer is to download and unzip and run the services.bat remove|install Tomcat6 Because of the App that we are working with, we can only use Tomcat 6.…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …
This Micro Tutorial demonstrates using Microsoft Excel pivot tables, how to reverse engineer competitors' marketing strategies through backlinks.

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question