Solved

HP STORAGEWORKS SAN SWITCH 2/16V SWITCH 356373-001 - http management

Posted on 2012-03-17
3
477 Views
Last Modified: 2012-06-21
Hi,

Anybody knows how to manage HP STORAGEWORKS SAN SWITCH 2/16V SWITCH 356373-001 using http?  I setup the IP address, but I couldn't browse using that IP address
0
Comment
Question by:mokkan
  • 2
3 Comments
 
LVL 47

Accepted Solution

by:
dlethe earned 500 total points
ID: 37735034
I don't have a manual on it, but many switches have not only an IP number but either do shttp and/or a port number, i.e,
shttp://xx.xx.xx.xx:yyyy , instead of plain http://xx.xx.xx.xx
0
 

Author Comment

by:mokkan
ID: 37735400
I  tried already, but not working. Do I need to start any  process?
0
 
LVL 47

Expert Comment

by:dlethe
ID: 37791484
There is going to be a factory reset button .. somewhere, there always is.  Read up on the default IP/port number first, then go to factory.  Most likely you are using the wrong IP number.  (I assume you checked cabling first)
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
Having issues meeting security compliance criteria because of those pesky USB drives? Then I can help you! This article will explain how to disable USB Mass Storage devices in Windows Server 2008 R2.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now