Solved

how to issue 3 dhcp scopes to 3 vlans with one dhcp server?

Posted on 2012-03-18
3
400 Views
Last Modified: 2012-04-12
Scenario:
--> there are 3 vlans i.e. vlan1, vlan11, vlan22
--> one DHCP server windows 2008 R2
--> Inter vlan is enabled through layer three switch.

Question:
how to issue 3 dhcp scopes with one dhcp server?
do i need multiple LAN cards with server and to connected with all vlans?
please help to configure dhcp rang to multiple vlans with one server?

please find the attachment for detail.
thanks
dhcp-with-vlans.jpg
0
Comment
Question by:nainasipra
  • 2
3 Comments
 
LVL 23

Accepted Solution

by:
Dirk Kotte earned 500 total points
ID: 37735238
you simply create the 3 scopes (adress ranges) at your dhcp server.
the switch (with routing mode?) connects all vlans and lets ping the server devices within all3 vlans... thats important.
this "router" need an ip-helper address (the ip from the dhcp-server).
this function catches the dhcp broadcast within the vlan (which is not routed by default) and redirect them as unicast to the dhcp-server.
the dhcp server "recognize" the ip-interface at which the switch ("router") firt seen the packet, takes a adress from the corresponsing scope and offer it.

your server should only have one IP-interface (NIC) - especially it is an domain-controller.
0
 

Author Comment

by:nainasipra
ID: 37771317
Dear dkotte,

Please explain more how i will connect my switch to all vlans, and my switches have DHCP relay functionality how i can use that.
0
 
LVL 23

Assisted Solution

by:Dirk Kotte
Dirk Kotte earned 500 total points
ID: 37771397
first configure dhcp-relay or IP-helper as explained within your switch-.config-guide to point to your real DHCP-Server.
than configure the additional leases at your DHCP-Server. (new scope)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I was asked if I could set up a fax machine so that incoming faxes were delivered to people's Exchange inboxes and so that they could send faxes from their desktops without needing to print the document first.  I knew it was possible but I had no id…
If you migrate a Terminal Server licenses server inside the 2008 server family, you can takte advantage of the build-in migration tool. If you like to migrate an older 2003 Server (and the installed client CALs) to a 2008 R2 server for example, you …
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now