Solved

UAG 2010 change ssl certificate

Posted on 2012-03-20
6
2,291 Views
Last Modified: 2012-04-03
Hello,

I am going to change the SSL cert used for publishing exchange, already ordered a new one. How is the best practise for this in regards to backing up the existing(going to expire) SSL cert and using the new one. Can the old be renamed or will I have to delete it? Can I simply import the new one into certificates mmc on the UAG server and pick it up using the UAG console? Any kind of iisreset needed? Does anyone have a good, easy, simple link that explains this process?

Thanks
0
Comment
Question by:synackrst
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 2
6 Comments
 
LVL 51

Expert Comment

by:Keith Alabaster
ID: 37744453
Once you get the new cert you'll install it on the Exchange system in the normal way, then you'll export it with the private key.

Then on the UAG box, you'll import this exported file via the certificates mmc placing it in the local computer store - make sure you also install any intermediate certificates the vendor may require.

On the UAG you'll need to edit any published services that use the certificate - and select the new one. The old certificate can stay there, it does no harm.
0
 

Author Comment

by:synackrst
ID: 37744584
Cheers Keith! Should I rename the old ones friendly name in the MMC? As I remember the UAG dropdown menu for certificates is pretty plain(no expiration date or other unique info). What do you usually do in regards to this? After that, do you just activate the config in UAG or do you also perform IISRESET on the UAG server?
0
 
LVL 51

Expert Comment

by:Keith Alabaster
ID: 37744678
Personally? I remove the old certificate completely. I do rerun the Activate config routine - just in case the TMG supplied with the UAG has used the certificate in any of its own listeners (you may want to check a 'before and after' yourself just to be on the safe side) but I also reboot the UAG. A reboot of the Exchange services should not be necessary.
0
Why Off-Site Backups Are The Only Way To Go

You are probably backing up your data—but how and where? Ransomware is on the rise and there are variants that specifically target backups. Read on to discover why off-site is the way to go.

 

Author Comment

by:synackrst
ID: 37744750
Ok Keith, thanks for good insight. Will try it out and get some info here when done.
0
 
LVL 51

Accepted Solution

by:
Keith Alabaster earned 300 total points
ID: 37744790
No problem - I will be here.
0
 
LVL 51

Expert Comment

by:Keith Alabaster
ID: 37799730
Thanks :)
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

717 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question